Page 4 of 9 FirstFirst 1234567 ... LastLast
Results 76 to 100 of 205

Thread: 40k done, now is only hard to submit :P (Ricky/PedroRocha)

  1. #76
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    31,147
    dont get mad at us because he cant post, its his fault :P he never clicked the verification link in the registration email he got back when he joined xs

    after the attacks we locked the unconfirmed accounts so they cant post.

    sagres? going to check the portugueese supermarket tomorrow

    cheers!

  2. #77
    Xtreme Legend
    Join Date
    Jun 2002
    Location
    Helsinki, Finland
    Posts
    2,559
    memory was "only" at 268 2-2-2-5
    hmm are you sure?
    if CPU is at 3391 then the RAM speed would be 261MHz (3391 / 13 = 261) - right?

  3. #78
    Xtreme Legend
    Join Date
    May 2003
    Location
    Portugal
    Posts
    669
    thanks sayaa now i can post hehehe

    Quote Originally Posted by macci
    hmm are you sure?
    if CPU is at 3391 then the RAM speed would be 261MHz (3391 / 13 = 261) - right?
    macci you are right, we use mult 12,5 so it uses the 13 on ddr
    we need somthing like 3.5 to get 270mhz on ddr and it is possible

    about vddq i solder the check point wrong, and we only see that with card insulated so i just turn a litle the pot but realy dont know what vddq we use
    about vdd 2.35v seems to be enought for 680mhz

    the max i can get on vgpu is 1.86 load before card resets... i need to remake the ovp, changing the pot with card insulated is hard to get the best value...


    i spend 1 night remaking 2nd stage of my cpu cascade there is a new compressor, and some several changes, with non pure r1150(i use the same on old cascade) and very r404a mixed becouse r1150 isn´t enought i can get -100idle and -91 @ end of each 3dmark test, i cant wait to get more ethylene and realy fine tune this cascade

    in the other hand, gpu cascade isn't nice, i need to tune it better @end of each test it goes to -80 and idle -93 there is a realy mixed gas inside too...
    maybe next week the cascades be ready
    Last edited by |RickY|; 10-03-2004 at 07:59 AM.
    3dmark addict
    phase-change addict
    dirty benching addict
    tits lover

  4. #79
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Sierra Nevada Mountains (not my Beer)
    Posts
    472
    Quote Originally Posted by |RickY|
    thanks sayaa now i can post hehehe



    macci you are right, we use mult 12,5 so it uses the 13 on ddr
    we need somthing like 3.5 to get 270mhz on ddr and it is possible

    about vddq i solder the check point wrong, and we only see that with card insulated so i just turn a litle the pot but realy dont know what vddq we use
    about vdd 2.35v seems to be enought for 680mhz

    the max i can get on vgpu is 1.86 load before card resets... i need to remake the ovp, changing the pot with card insulated is hard to get the best value...


    i spend 1 night remaking 2nd stage of my cpu cascade there is a new compressor, and some several changes, with non pure r1150(i use the same on old cascade) and very r404a mixed becouse r1150 isn´t enought i can get -100idle and -91 @ end of each 3dmark test, i cant wait to get more ethylene and realy fine tune this cascade

    in the other hand, gpu cascade isn't nice, i need to tune it better @end of each test it goes to -80 and idle -93 there is a realy mixed gas inside too...
    maybe next week the cascades be ready
    Congrats on the cascade, O/c and the Score! You two guys are great together ... gonna be really hard to beat your scores when Ricky gets everthing teaked! Again!!

  5. #80
    Registered User
    Join Date
    Aug 2002
    Location
    Portugal
    Posts
    21
    Congratz again folks


    BTW ... SuperBock Rulez, Sagres sucks
    Well it's a matter of taste ... Sagres Sponsors the Portuguese National Soccer team ... but SuperBock is better for me ...

  6. #81
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    my opinion = holy crap! congrats!
    ---

  7. #82
    Xtreme Member
    Join Date
    Sep 2003
    Location
    Denmark
    Posts
    298
    Crazy score there

    Cant keep up with that I think. You guys have 2 x cascade vs. 1 prommy and DI.......Not looking good until we have the container for gfx, then it will be 2 x cascades vs. LN2+DI.

    Som say crazy Danes.....I say "el crazy portugese"
    Brian Hermansen...benching with Jacob Hansen
    3DMark01 42400 | Aquamark3 104762 | PiFast 34.58
    Running chilly1 cascade

  8. #83
    Xtreme Infrastructure Eng
    Join Date
    Feb 2004
    Posts
    1,184
    HOLY SMOKES!!!

    Congratulations to Pedro and Ricky

    Keep up the good work!
    Less is more.

  9. #84
    Xtreme Infrastructure Eng
    Join Date
    Feb 2004
    Posts
    1,184
    Quote Originally Posted by GomerPyle
    Som say crazy Danes.....I say "el crazy portugese"
    You mean, "o português louco"
    Less is more.

  10. #85
    AMD Fanboy
    Join Date
    Jan 2003
    Location
    San Luis Obispo, California
    Posts
    2,251
    wow i feel small...
    Dell Studio XPS16... no desktop
    yes i have AIM, yes you can send me a message. EvilSpork3 i dare you.

  11. #86
    Xtreme 3DMark Addict
    Join Date
    Sep 2003
    Posts
    4,225
    Quote Originally Posted by Pedro Rocha
    Nope, I just do a good help.

    For me there only 2 "gods" in 3DMark01 - Macci and RickY
    That is my personally opinion - of course there are other very good guys around, but for me only RickY and Macci have their place assured in the Olympus of 3DMark 2001

    I wouldnt count out OPP yet, hes set some insane records including 31.3k with his 9800xt that no one has yet to beat! Do you or anyone else feel like aiming for like 33k with what is now a "lower class" card, competition there has been sparce since the x800s made their debut


    "Oh Ya, 40k down!!
    Killer power guys"


    Im not counting you out, you have the talent to hit 40k yourself and probably sooner than we think also do you still have this 9800xt to beat your own record of 31.3k


    "Macco/Pedro
    I diddnt notice that before now. It seems they both are getting a big boost in CH, and a more moderate one in Lobby.
    CH is hardly bandwithdependant AFAIK, so it must be something else than just the bandwidth of the FX. For lobby, the bandwitdth can and most certanly do make a big difference.

    To make it very clear to all in here; I am NOT acusing Pedro for cheating. Im just curious by nature, and have to fint out where the boost come from. Also in order to use the tweaks/tricks myself of course"


    yes id like to know those too. I believe one part of that could be the 4.10 cat drivers, some say it boosts across the board, I ought to try those out and of course codered's tweaker then I can beat some of my friends moble barton + 9800 pro scores(man if I had their 9800 pros id have mid 24k maybe even 25k) any other tips to boost car high?
    3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
    9700pro at 325/310 runs all games buttery smooth!

    9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
    9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
    9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
    9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
    3dmark scores with Ti4200 and Ti4800se
    Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
    3dmark scores with older gpus
    Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551

  12. #87
    Xtreme Addict
    Join Date
    Mar 2003
    Location
    Denmark
    Posts
    2,055


    FX power
    "M-I-A"

  13. #88
    Xtreme Legend
    Join Date
    May 2003
    Location
    Portugal
    Posts
    669
    Quote Originally Posted by Geforce4ti4200
    I To make it very clear to all in here; I am NOT acusing Pedro for cheating. Im just curious by nature, and have to fint out where the boost come from. Also in order to use the tweaks/tricks myself of course"
    nature with this cards is dependend from system too
    but with a64@3.1 and gpu@800 we get 330+
    on this fx@3.4 we just run the card@700/650 to get this 316fps
    3dmark addict
    phase-change addict
    dirty benching addict
    tits lover

  14. #89
    Xtreme Member
    Join Date
    Jul 2004
    Posts
    280
    which means if the card is at 800/6**

    :O
    your my idol

  15. #90
    Xtreme 3DMark Addict
    Join Date
    Sep 2003
    Posts
    4,225
    what I had said was a quote from someone else. How many fps are we talking gained in nature with more cpu power? cant be very many since its 95% gpu bound. He had also made a quote wondering howd you hit 182 in car high at 3.3GHz where others with that cpu speed get in the mid 160s, what tweaks were used, we all wonder
    3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
    9700pro at 325/310 runs all games buttery smooth!

    9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
    9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
    9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
    9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
    3dmark scores with Ti4200 and Ti4800se
    Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
    3dmark scores with older gpus
    Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551

  16. #91
    Xtreme Legend
    Join Date
    Jun 2002
    Location
    Helsinki, Finland
    Posts
    2,559
    Nature is more video mem limited than GPU speed limited btw, I got only around 332 at 810/655, need to attach the vmem mod once again I guess.

    whoops 330.3 actually - and comes to show that untweaked WinXP SP2 on A64 gives a crap score overall
    Now where is my Win2000 CD again??
    Last edited by macci; 10-03-2004 at 11:39 AM.

  17. #92
    Xtreme Member
    Join Date
    Jul 2004
    Posts
    280
    ahh i see

    Nice scores guys from Portugal
    your my idol

  18. #93
    I am Xtreme
    Join Date
    Feb 2003
    Location
    Netherlands
    Posts
    6,421
    What can i say that hasn't been said already?
    I just had to re-read the title of this thread to make sure my eyes weren't deceiving me.

    You guys seem to break record after record with that amazing cascade stuff.

    congrats x a lot
    Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB

    Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing

    Case: Murdermodded TJ-07

    sub 9 sec. SPi1M 940BE 955BE 965BE 1090T

  19. #94
    Registered User
    Join Date
    Feb 2004
    Location
    Portugal - Europe
    Posts
    37
    congratulation ricky and pedro, excellent work you're doing

    very nice to see Portugal at the top of the orb


    A64 3200+(1Mb) @2510MHz | Epox 8KDA3+ |
    nVidia Sata RAID 0 | R9800Pro@445/760 |
    DVD-RW | OCZ PC3700EB | Audigy2 |
    Samsung 959NF | OCZ Powerstream 520W |


  20. #95
    Xtreme AMD Fanboy
    Join Date
    Nov 2002
    Location
    Salem / Corvallis, OR
    Posts
    979
    Phenominal system power guys.

    That thing had to be tuned through the roof. Very impressed.



    @macci:

    Sitting a wee bit too long at 35K methinks. There are aircooled guys at 32.

    Proud Founder of Redline 3D

  21. #96
    Xtreme Member
    Join Date
    Jul 2004
    Posts
    280
    I have a feeling, macci has something up his sleeves
    your my idol

  22. #97
    Xtreme Member
    Join Date
    Nov 2003
    Location
    Western Pa
    Posts
    257
    Very nice score.
    Abit NF7-S V 2.0
    AMD XP 2500+ @ 2300+Mhz
    2x256 Twinmos (DC) BH-5
    WD 80 GB w/8MB Cache
    XFX Ti 4200-- 128MB
    Windows 2k Pro
    CPU watercooled by Flowmaster

  23. #98
    Xtreme Legend
    Join Date
    May 2003
    Location
    Portugal
    Posts
    669
    we dont use any expecial tweaks! i just stay looking to results like
    fx power, simply fx power

    i think macci will know rapid that there is no expecial tweaks there, just put 3.4ghz fx running 3dmark and see it

    3dmark addict
    phase-change addict
    dirty benching addict
    tits lover

  24. #99
    Xtreme 3DMark Addict
    Join Date
    Sep 2003
    Posts
    4,225
    so others with 3.2GHz fx53 getting like 165 in car high had a real bad run to your 182 at 3.3GHz?
    3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
    9700pro at 325/310 runs all games buttery smooth!

    9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
    9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
    9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
    9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
    3dmark scores with Ti4200 and Ti4800se
    Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
    3dmark scores with older gpus
    Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551

  25. #100
    Xtreme Member
    Join Date
    Mar 2004
    Location
    Virginia
    Posts
    353
    3391mhz, if your rounding that would be 3.4.

    Congrats ricky and pedro ! sick score.

Page 4 of 9 FirstFirst 1234567 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •