D26 BLACK-MANTARAY
Features:
- Base on D26 bios structure
- Changed the Disable and Enabled CPU Interface Table 133, 166 & 200 MHz FSB: (ABIT Stock ROMSIP Tweak by tictac)
- DISABLE CPU Interface : Unchanged
- ENABLED CPU Interface : Fix Unstable Timing in D26 SplitFire with 3D Application
- Vcore Revised same as D23 3D Fire R1 & R2
- New Small ABIT Logo at Boot Up
- 3D Fire Ingredients : Included
- Bios Layout : Stock ABIT Bios
- CPU Disconnect Function Patch as Recomended by nVidia Tech
- Side Band Addressing : Enable by Default ( Depends on VGA Driver. It might overwrite the setting to Disable)
- Dimm Driving Stregth & Slew Rate : Stock ABIT Configuration
- Alpha Memory Timing : Stock ABIT Configuration
- Unknown Processor -> Renamed to AMD XP Mobile for Athlon Mobile User
- New Full Screen Logo on BootUp( Press Tab to show POST screen , Press Delete to enter Bios)
- Improve 3DMark2001SE & 3D Application stability at high FSB
- SATA Bios Version 4247
a)Command Per Clock Enabled
http://forum.abit-usa.com/attachment...&postid=417785
http://www.geocities.com/nastechxtre...ckMantaray.zip
http://home.doramail.com/tictac/D26-BlackMantaray.zip
b)Command Per Clock Disabled
http://forum.abit-usa.com/attachment...&postid=417786
http://www.geocities.com/nastechxtre...ntaray-CPC.zip
http://home.doramail.com/tictac/D26-...ntaray-CPC.zip
:thumb:
D26 BLACK-MANTARAY L12
Features:
- Base on D26 bios structure
- Changed the Disable and Enabled CPU Interface Table 133, 166 & 200 MHz FSB: (ABIT Stock ROMSIP Tweak by tictac)
- DISABLE CPU Interface : Unchanged
- ENABLED CPU Interface : Fix Unstable Timing in D26 SplitFire with 3D Application
- Vcore Revised same as D23 3D Fire R1 & R2
- New Small ABIT Logo at Boot Up
- 3D Fire Ingredients : Included
- Bios Layout : Stock ABIT Bios
- CPU Disconnect Function Patch as Recomended by nVidia Tech
- Side Band Addressing : Enable by Default ( Depends on VGA Driver. It might overwrite the setting to Disable)
- Dimm Driving Stregth & Slew Rate : Stock ABIT Configuration
- Alpha Memory Timing : Stock ABIT Configuration
- Unknown Processor -> Renamed to AMD XP Mobile for Athlon Mobile User
- New Full Screen Logo on BootUp( Press Tab to show POST screen , Press Delete to enter Bios)
- Improve 3DMark2001SE & 3D Application stability at high FSB
- SATA Bios Version 4247
- Fix Unmodded Athlon Mobile & Tbred 133MHz FSB CPU Interface to 166MHz Interface
a)Command Per Clock Enabled
http://forum.abit-usa.com/attachment...&postid=418788
http://www.geocities.com/nastechxtre...ntaray-L12.zip
http://home.doramail.com/tictac/D26-...ntaray-L12.zip
b)Command Per Clock Disabled
http://forum.abit-usa.com/attachment...&postid=418798
http://www.geocities.com/nastechxtre...ay-L12-CPC.zip
http://home.doramail.com/tictac/D26-...ay-L12-CPC.zip
D10 MANTA RAYS XT
Features:
- Base On Abit Stock D10 bios
- CPU Disconnect function patch as recomended by nVidia Tech
- EXT P2P Discard time set 1ms by default (to prevent SATA corruption)
- SBA Enabled by default(VGA Driver might overwrite the setting)
- New small ABIT logo
- New Full Screen boot up logo (Manta Rays XT Logo by HouseRats @ OcForums.com)
- L12 Softmod for Tbred & Mobile to run on 166MHz Interface
- Beta 4x4 Ingredients : Included
- Command Per Clock : Enabled (ABIT D10 Stock BPL)
- Dimm Driving Strength & slew Rate : ABIT Stock D10 Configuration
- Alpha Timing : ABIT Stock D10 Configuration
- CPU Interface Enable & Disable : ABIT Stock D10 Configuration
- Bios Layout : ABIT Stock D10 Configuration
- SATA Bios Version : 4247
a)Command Per Clock Enabled
http://forum.abit-usa.com/attachment...&postid=420399
http://www.geocities.com/nastechxtre...ntaRays-XT.zip
http://home.doramail.com/tictac/D10-MantaRays-XT.zip
http://www.sparks.speedlinq.nl/files...ntarays-xt.zip
b)Command Per Clock Disabled
http://forum.abit-usa.com/attachment...&postid=426571
http://www.geocities.com/nastechxtre...ayS-XT-CPC.zip
http://www.sparks.speedlinq.nl/files...ays-xt-cpc.zip
D26 MANTA RAYS XT
Features:
- Base on D26 bios structure
- CPU Interface Table 166 & 200 MHz FSB: (ABIT Stock ROMSIP)
- DISABLE CPU Interface : Unchanged
- ENABLED CPU Interface : Improved 3D Handling & Bandwith Efficiency multiplier lower than 10
Bandwith Peak @ Multiplier 10.5
- Vcore same as D23 3D Fire R1 & R2
- New Small ABIT Logo at Boot Up
- 3D Fire Ingredients : Included
- Bios Layout : Manta Rays XT Edition
- CPU Disconnect Function Patch as Recomended by nVidia Tech
- Side Band Addressing : Enable by Default ( Depends on VGA Driver. It might overwrite the setting to Disable)
- Dimm Driving Stregth & Slew Rate : Stock ABIT Configuration
- Alpha Memory Timing : Stock ABIT Configuration
- AMD XP Mobile -> Renamed to AMD Athlon XP-M for Athlon Mobile User
- New Full Screen Logo on BootUp by HouseRat@OcForums.com( Press Tab to show POST screen , Press Delete to enter Bios)
- Improve 3DMark2001SE & 3D Application stability at high FSB
- SATA Bios Version 4247
- Soft L12 for Unmodded Tbred & Mobile
a)Command Per Clock Enabled
http://forum.abit-usa.com/attachment...&postid=421118
http://www.geocities.com/nastechxtre...ntaRays-XT.zip
http://home.doramail.com/tictac/D26-MantaRays-XT.zip
http://www.sparks.speedlinq.nl/files...ntarays-xt.zip
b)Command Per Clock Disabled
http://forum.abit-usa.com/attachment...&postid=421121
http://www.geocities.com/nastechxtre...ays-XT-CPC.zip
http://home.doramail.com/tictac/D26-...ays-XT-CPC.zip
http://www.sparks.speedlinq.nl/files...ays-xt-cpc.zip
Credit to:
- Rabbi : Beta testing on Micron 5B Chips (2 x 512MB = Max 254Mhz 2.5-2-2-11 multiplier 10.5)
- Uwackme : Beta Testing on KVR PC2100 , Winbond CH5 , BH5
- HouseRats @ OcForums.com : D10 Manta Rays XT splash screen
- Sparks : Hosting bios files
Bookmarks