awesome :thumbsup:Originally Posted by Learn
keep it smoking ....
awesome :thumbsup:Originally Posted by Learn
keep it smoking ....
Learn : Awsome!!!
Has anybody here got any problem using 8rdavcore? Because sometimes when I increase it to 1,9-2,0V I get some bsod error saying somethings wrong with nv4mini.
Then I restarted the computer and saw that my vcore was @ 2,2V
Abit NF7-S Rev2 and D26 XT bios.
AMD Turion MT34 @ 250*9=2250MHz 24/7
ATI X800PRO
MSI K8NM FISR BIOS Rev 1.5 My first BIOS modification
2x80GB Maxtor drives @ RAID-0
1x160GB Seagate
Everything in a mATX case.
Learn.... thanks ofr tips.... My Infineon at-7 cant pass 180MHz stable
so.....
i set to 5:3 ratio .... pump up the FSB......... 260MHz....... lol... it is stable with 3d mark2001 & prime95
Thanx m8... :thumbsup:
i'm keeping this setting until i get new ram
Last edited by tictac; 09-21-2004 at 05:56 AM.
From what i've read previously adjusting vcore beyond 1.85v (NF2 boards) in windows is a big no-no with any utilty.Originally Posted by LorD_Kvadd
Dunno if it's true but i would suggest making adjustments over 1.85v from the bios only for safety sake.
GA-P35-DS3L no more than 450fsb w/1333 chip
E6550 stuck at 3150
V-DATA 2x1gb
MSI 7900GS 512 3Dmark score in near future
Old A64 scores2001 39,707 3D03 23,768 3D05 11,394 3D06 5914
tictac & Learn: Why running out of sync? you get alot worse performance running out of sync on nForce2 (and other A-XP-) boards. Even if you have a great FSB you loose alot more performance running out of sync.
i'm running 1:1 for my 24/24 setting, it's just some 'testing'. for an futur project.Originally Posted by Rolle2k
i've not posted a screenshot because the score sucked....
learn A.K.A JP
Doh I borked my 2k install trying over 265 fsb (1:1). I can't seem to do it, no matter what my vdd, vdimm, etc is set at. Must just have hit the limit on this motherboard. Now I just gotta figure out how to get 10.5x260 stable, but it doesn't like anything over 250 at multi's 9.5 and higher. Anyone using non-stock NB cooling and did it help w/ fsb or stability? also I have no clue if my VTT is tracking... but i doubt it.
i've lapped my NB, and cooled it with my waterchiller (liquid 20°C), it help raising my fsb (stable). how much MHz? i don't know, but it help for sure.Originally Posted by FDM
i've doing the vtt mod, it seems not helping a lot...
i need to fix the vddr fluctuation at high vddr, i can do 3dmark 260 1:1 22211 at this time, but it's hard...
all this test are with low multi.
learn A.K.A JP
nah.. i think it work better than my previous setting
my previous setting 180Mhz x 12.5 @ 2.5-3-3-11
3D Mark 2001 score 1970
now running at 260Mhz(5:3) @ 2-2-2-11 timing
3D Mark 2001 score 1965
If i have good ram... of course i will use 1:1..
but with infineon at-7.... i better keep this setting for a while
if you look at sandra efficiency it will show 50-55%... that is bug coz it count the efficiency from FSB speed not the ram speed... go figure it out :banana4:
Last edited by tictac; 09-21-2004 at 11:06 AM.
i set my ext p2p discard time to 1ms & PCI latency to 128clock / 160 clock to prevent any corruption issueOriginally Posted by FDM
does this d10 really work with sata? I have never had a single D10 work with SATA so far...Originally Posted by tictac
thanks for the hardwork tictac
VX/UTT Voltage Scaling, please contribute...
10x260 _ 1T-2-2-2-8-7-15 _ 3.3vDIMM _ 1.75vCORE
Mobile 3400+ CG 0437XDPW
DFI LanParty UT
XP120 w/ 120mm Thermaltake Thunderblade
2x512MB OCZ VX
BBATI 9800np w/Infineon
PC Power & Cooling 510w Deluxe
I second that!
New personal record Picture
Mantaray XT D26bios
AMD Turion MT34 @ 250*9=2250MHz 24/7
ATI X800PRO
MSI K8NM FISR BIOS Rev 1.5 My first BIOS modification
2x80GB Maxtor drives @ RAID-0
1x160GB Seagate
Everything in a mATX case.
What is the difference between Command per Clock enable and disable ?
dnb-sets 4tw
Drum n Bass Arena ..
WPO Powerlifting
2-2-2-11 1T = CPC On 2-2-2-11 2T = CPC Off
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
And whats "better"
I heard 1T doesn't work good or somethin' like this !
Or is it only.
1T faster but not so high
2T a bit slower but higher clockrate !
dnb-sets 4tw
Drum n Bass Arena ..
WPO Powerlifting
Hmm, like u want, i think it works good and im on 1T ;D
Look @ this :
238 x 11 = 2.618, 11-2-2-2, CPC Off: SuperPi 1M 40 Sekunden
217 x 12 = 2.604, 11-2-2-2, CPC On: SuperPi 1M 39 Sekunden
238 x 11 = 2.618, 11-2-2-2, CPC Off: 3DMark 2001Se 18.799 Punkte
210 x 12,5 = 2.630, 11-2-2-2, CPC On: 3DMark 2001Se 18.800 PunkteOriginally Posted by Noktar
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
My Problem is.
My Board doesn't work high.
Don't know why.
Stock Cooling.
Stock Voltage.
And I only can do 220x9 @ 1.775V (real 1.715V)
Don't know why.
And I KNOW my 1700+ does 2400Mhz with Air !
And if I do over 1.8V I only got Beeps !
Is there a Bios with more than 2.9 Vdiimm ?
dnb-sets 4tw
Drum n Bass Arena ..
WPO Powerlifting
No, there are no Bios with higher Vdimm! In ur Sig. its 265MH FSB??
How it comes? Maybe u have an very bad NF7
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
Noktar: My NF7-S had this problem once, that when I set Vcore @ 1,8-1,9 the board didn't want to start. Just started beeping and stuff.Think it was 1,825V and 1,875V. Try like 1,85 and 1,9V if you coolings good
AMD Turion MT34 @ 250*9=2250MHz 24/7
ATI X800PRO
MSI K8NM FISR BIOS Rev 1.5 My first BIOS modification
2x80GB Maxtor drives @ RAID-0
1x160GB Seagate
Everything in a mATX case.
That Vcore related to: :thumbsup:
Heat
PSU
APIC Mode
Temps Diode
is that with 2-2-2-11 1:1?Originally Posted by LorD_Kvadd
:thumbsup:
ya its hard to keep >250Mhz stable with multiplier higher than 10
Christ this bios screwed with my motherboard. Now I cant raise my vcore past 1.9v. I can run the same fsb...completely stable at 1.9v and immediately shuts down with a two toned siren at 1.9+vcore. Anyone ever heard of this? I had a 1.95v vcore before the flash. I flashed back to merlins D25 2D bios and I am getting the same problems :S
What to do at Win Flash?
Update from File
Choose the .bin Bios file.
Then the Prog updates the Bios.
And then only restart ?
dnb-sets 4tw
Drum n Bass Arena ..
WPO Powerlifting
Exakt.Originally Posted by Noktar
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
Bookmarks