My Rails OK - Other Q's also

[The Runner]

Just put a Antec TrueBlue 480W PSU in.

How are these rails?

3.3v - 3.290 - 3.10
12v - 11.980

also the psu seems to be making what seems to be a hissing noise or something, a whine/ hissing noise. Much like the raptors.

[OC_Newbee]

Originally posted by The Runner
Just put a Antec TrueBlue 480W PSU in.

How are these rails?

3.3v - 3.290 - 3.10
12v - 11.980

also the psu seems to be making what seems to be a hissing noise or something, a whine/ hissing noise. Much like the raptors.

Your looks much better than mine and I have the Antec truepower 550w. Are you reading those rail of from a multimeter or a hardware monitor? Mine read like this from the voltage hardware monitor.

+3.3v - 3.1-3.2
+5v - 4.78-4.8
+12v - 11.57-11.78

I didn't care much since I don't really trust the hardware monitor and my system are stable as a rock. If I feel the needs to check, I will use the multimeter instead.

[Evil_Spork]

kinda low guys..


3.3 = 3.5
5 = 5.24
12 = 12.000

i never see any change with any rails with my multimeter. if i do its in the .00X range, the X will change 1 or 2 up or down.

[Gogeta]

I agree with Spork. My rails always stay above or even to their specified values. Enermax 450W.

[saaya]

3.7v 5.8v 14.1v AFTER modding though before the mod they were totally fine except for the 12v wich was a bit high at 12.8 and the 3v was at 3.30-3.29

[`schr0et]

Love my PC Power & Cooling 425W, lines NEVER fluctuate!



3,3 = 3,31
5V = 5,04
12V = 12,08

I was checking using the xx.xx function on the MM, mines seriously never fluctuated, love this pS!

[Susquehannock]

Love my 300w Fortron fsp300-60atv.

The '+' rails rarely fluctuate more than 2% in my
Soltek.
(RAID array, CD/RW, DvD, 1700 @ 2.5ghz, 768mb RAM, 9500 GfX
direct 12v conn, fans, lights, ... etc ...)

Awsome PSU for $30 w/shipping!

[saaya]

modded to 3.7v 5.8v 14.1v my rails dont fluctuate at all!
fortron 350W (60BTP)