3x2GB Super Talent 2200C8 @DDR3-2392Mhz 8-8-8-24 1.7v

[Don_Dan]

I used Radaja's settings as a starting point and I was able to get 1740 6-6-6 stable at 1.70v. Very strange that less volts worked.

Do you have a fan over your memory? Please check temps, Hypers don't like to get hot.

[Shiranui Gen-An]

Do you have a fan over your memory? Please check temps, Hypers don't like to get hot.

Of course. Using an old Dominator fan.

[BeepBeep2]

Looks better. That already beats my set so I'm looking forward to see if you can get that higher.

[radaja]

yep i agree.same stuff just its whether you get a decent kit.

[zsamz_]

yep i agree.same stuff just its whether you get a decent kit.

jackpot for radaja

[radaja]

whats the max vdimm for hypers for benching?

[zsamz_]

whats the max vdimm for hypers for benching?

dont kill the memory they new
i'd say 1.8
but i havent given more than 1.68 till now

[BeepBeep2]

I've got Prime95 for hours at 1.75v with no apparent harm. I'd be afraid to go over 1.78-1.8v for benching.

[Hondacity]

rams have been used over 1.75v and less than 1.8v ....no crashes yet...

[BeepBeep2]

Just make sure they don't get hot. You need alot of airflow over the side, I've got a 50 CFM 92mm fan over them. They get really hot even at 1.65v without airflow.

[andressergio]

Personally i dont like and use those fans that comes with Gskills or Corsair as hot air gets trapped inside...i prefeer to use a side fan or 2, i have 1 pointing the MCH and mem from the left and a 12x12 blowing from the other side

i have them set as this, GSkills PIS 2000CL6





Cheers !
Sergio

[radaja]

thanks for the quick replies guys.1.75v vdimm it is for me then

i also dont like the ram fans.i like using my two 40mm
4k rpm TT fans taped to the top of the ram,plus i have
my RAD(two ultrakaze 3000RPM) at the top of my 800D
sucking in the air from AC(5c air) into the case.so im good

[andressergio]

thanks for the quick replies guys.1.75v vdimm it is for me then

i also dont like the ram fans.i like using my two 40mm
4k rpm TT fans taped to the top of the ram,plus i have
my RAD(two ultrakaze 3000RPM) at the top of my 800D
sucking in the air from AC(5c air) into the case.so im good

lol 5C thats a nice temp radaja thanks to my new parts i dont need AC anymore

[zsamz_]

lol 5C thats a nice temp radaja thanks to my new parts i dont need AC anymore

i never giving up the a/c i got the 320 thermochill right on the vent of my 12k btu portable
my 980x idle below 20c load @ 40c @ 4.4 if i go full blast
even see a 5870 idle @ 15c

[andressergio]

i never giving up the a/c i got the 320 thermochill right on the vent of my 12k btu portable
my 980x idle below 20c load @ 40c @ 4.4 if i go full blast
even see a 5870 idle @ 15c

hell yeah i have an UFESA 11k btu portable also that used on summer to chill the rad

[radaja]

i never giving up the a/c i got the 320 thermochill right on the vent of my 12k btu portable
my 980x idle below 20c load @ 40c @ 4.4 if i go full blast
even see a 5870 idle @ 15c

i got a feser quad120 rad on the way.thanks for the tip

[zsamz_]

i got a feser quad120 rad on the way.thanks for the tip

feser quad120 love on da a/c commin

[systemviper]

i never giving up the a/c i got the 320 thermochill right on the vent of my 12k btu portable
my 980x idle below 20c load @ 40c @ 4.4 if i go full blast
even see a 5870 idle @ 15c

sweet

[zsamz_]

sweet

i got second a/c to cool the room wife dont want it anywhere else she thinks they ugly thigs

[eva2000]

thanks for the quick replies guys.1.75v vdimm it is for me then

i also dont like the ram fans.i like using my two 40mm
4k rpm TT fans taped to the top of the ram,plus i have
my RAD(two ultrakaze 3000RPM) at the top of my 800D
sucking in the air from AC(5c air) into the case.so im good

nice setup there, using 3x 60x25mm sunon 23.5cfm maglev fans for cooling memory

trying some 12GB Elpida Hyper action next

[CryptiK]

Personally i dont like and use those fans that comes with Gskills or Corsair as hot air gets trapped inside...i prefeer to use a side fan or 2, i have 1 pointing the MCH and mem from the left and a 12x12 blowing from the other side

i have them set as this, GSkills PIS 2000CL6

http://img541.imageshack.us/i/p10406841.jpg
http://img541.imageshack.us/img541/7513/p10406841.jpg



Cheers !
Sergio

thanks for the quick replies guys.1.75v vdimm it is for me then

i also dont like the ram fans.i like using my two 40mm
4k rpm TT fans taped to the top of the ram,plus i have
my RAD(two ultrakaze 3000RPM) at the top of my 800D
sucking in the air from AC(5c air) into the case.so im good

Heh, you guys are soft, the ram fans are fine In all seriousness I think they are, it's not like the inside of the case is very hot if you have good case airflow, and the ram is easy to cool.

i got a feser quad120 rad on the way.thanks for the tip

Same rad as I use, I expect you'll like it.

nice setup there, using 3x 60x25mm sunon 23.5cfm maglev fans for cooling memory

trying some 12GB Elpida Hyper action next

http://img.i4memory.info/reviewimage...c8_12GB_01.jpg

http://img.i4memory.info/reviewimage...c8_12GB_02.jpg

That's some ram pr0n right there George

[andressergio]

Heh, you guys are soft, the ram fans are fine In all seriousness I think they are, it's not like the inside of the case is very hot if you have good case airflow, and the ram is easy to cool.

yea turn maraca from time to time

[kill_a_wat]

nice setup there, using 3x 60x25mm sunon 23.5cfm maglev fans for cooling memory

trying some 12GB Elpida Hyper action next

Love the look of 12gb. This should get interesting hehe

[eva2000]

not easy clocking 12gb of ram ... great work eva2000

thanks

gees lol thats awesome eva! to get low timings like tha on 12gb? LOL niceeeeeeee

yeah i also noticed transferring data between partitions from sata to ssd is much faster with 12GB than 6GB

Your results are astonishing, ways better than mine.
The 3 kits I got last month topped with 150x12 booting into windows -- single channel.

I tested them single stick each time for the max frequency booting into windows.
At 1.7v, they are in the range of 148-150x12 6-6-6, 171-175x12 7-7-7.

OS: Windows 7 x64
CPU: i7 920 1.3625v core, 1.425v vtt, 1.7v dram
x12 ram, x24 uncore, x20 core
(CPU can boot into windows at 187x12 8-9-8 BBSE/187x12 8-8-8 Hyper)
MB: R3E BIOS 0602
PCI device: 1x GTX480@PCIE x8, 1x XFi EP@PCI

bit confused you said 148-150bclk x12 mem multi 6-6-6- that's 888-900mhz same as mind not worse just the same

Love the look of 12gb. This should get interesting hehe

yeah

Funny only just noticed in everest spd display, that the XMP Extreme DDR3-2200 profile for 8-8-8-24 also has a setting for 6-6-6-20 and look what mem frequency it is = 879mhz 6-6-6-20 which coincidentally is the frequency I hit for 6x2 = 12GB @879Mhz 6-6-6-20 1T of course at higher volts 1.7v instead of 1.65v which 2x2GB 2200C8 kit XMP Extreme profile would be rated.

[Sam_oslo]

Good job with 12GB

I've just found a used Dominator GT 2000Mhz CL8 6GB kit for under half of price, and was considering to buy it. But after seeing your results with these 2200 CL8 kit, I see why the seller is dumping it so cheap.

What's the price for this kit? EDIT: never mind I found the price on the first page.