3200+ winnie 0504 (forget the stepping, didn't write it down )
2600mhz prime95 stable @ 1.7v :/
but if i back off to 1.65v i still get 2580mhz prime95 stable, so that seems to be the sweet spot
3200+ winnie 0504 (forget the stepping, didn't write it down )
2600mhz prime95 stable @ 1.7v :/
but if i back off to 1.65v i still get 2580mhz prime95 stable, so that seems to be the sweet spot
but the WR is now of 543Mhz ,i'm only second :
nice,very nice
FX air cooled
3040mhz
Mojo
Family
Biostar TP55 XE - Core i7 860(ES) @ 4.2ghz - CNPS10X Extreme - G.SKILL 1600 - Galaxy GTX275 - Velociraptor 300GB x 2 - Zippy TypeR 600w
Criminal
Biostar Tpower X58A - 920~Gulf - G.SKILL2000CL8 - GTX580 - Intel 520 120GB - Antec HCP 1200w
Biostar TP67XE/TZ77XE4 2500k~3770K - G.SKILL 2800 - GTX480 - OCZ Vertex2 50GB - Corsair AX1200
Biostar Tpower X79 i7 3820 ~ E5 2680 - G.SKILL 2400C11 - GTX560Ti - Intel 520 120GB - AX1200i
Kids
P4GD1 - Pentium M 780 - XMS Xpert400 - GTX460 - Raptor 36GB - Aopen 560w
im running my 3200 at 2.6 with my A8N-SLI Delux vcore 1.47 My present problem is that i can't get vcore any higher in the bios. I can run 2.5ghz stable with stock vcore.
i got some geil value running ddr460 3-3-3-5 1t can run ddr480 3-3-3-5 1t
ADA3000DIK4BI
CBBID 5003EPDW
1993299B50271
3000 @ 2.5 (278 with a 9/10 divider ram at 250) with 1.675 volts...modded SI-97 and a Tornado...I need to do some burn in to drop the voltage...
http://smbach.com/mad.gif
Opty 175 Rig
Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD
AM3 Rig
Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch
DFI NF4 BIOS Guide
0503Originally Posted by FireDragon
French Overclockers roxxxxxx
OCM Team addict
seem like urs is from the same batch as mineOriginally Posted by FireDragon
ADA300DIK4BI
CBBID 0503EPJW
1193319A50124
so far stable at 2.43 at 1.64vcore...seems like the newer batch need a lot of juice to reach high clock... wonder why clock gen didnt work well on my setup... have to play with bios for evrythings...
amd64 3000+
msi neo2 plat. nf3
tmsp pc3500 bh-5
6600gt chaintech
antec 450watt
3500+ Newcastle CAA2C 0505 APMW
MSI K8N Neo2 0444A2 chipset with Corsair Hydrocool 200 cooled cpu
2x 256MB KHX3200K2/512 BH-5
80GB WD 800JB
550W GTR Black PSU 38A/12v rail
stock vcore 1.47 = 11x 250HTT = 2750mhz
max pifast passable
1.6v = 2835mhz
1.65v = 2866mhz
using divider to test cpu max limits
3dmarks ran in same windows session
Gecube 9800Pro Extreme stock speed @398/351
amazing
Last edited by eva2000; 03-11-2005 at 08:41 AM.
---
just paintstable . :banana4:
0447. 3.0+ msi k8n neo2 with no mods [yet] .
fullbenchable @ 2.85~ 1.75vcore [testing]
fullstable @ 2.7~ defaultvcore
< 2.6ghz @ full stable undervolted
winbootable 200*9 @ 0.9vcore
watercooled.
3000+ 0444 MPM 2.7GHz @ 1.6v
Cooled by a thermalcrap heatsink and tornado fan
a64 winnie 3000
CBBHD 0449 MPM
far as I know, I have the only and latest CBBHD MPM chip, haven't seen anyone else post the exact same stepping.
suicide oc's, 2.6 at 1.4 volts, 1.7 volts only yielded 2.8, this is on stock cooler air, NOT tested for stability, only sandra benched, will post screenies and edit this when I get water with 24/7 memtest/3dmark stable tests, as max mhz mean little except for benching and bragging rights.
ALIENS are bringing my next kentsfield based rig in a UFO case!
hmm well my best stable tested system is 2.6ghz at 1.5vcore. i can get 4ghz on my 3200 in bios il post some pics in a sec
SYSTEM
AMD64 3200@2.7ghz stock cooler
1gig Geil Value ram @ 470 3-3-3-5 1t
A8N-SLI Deluxe
Gigabyte 6600GT@580mhz/1.3ghz
120gig SATA Seagate
i know that its not the best as its only bios but it is with stock cooling as those last pics show. btw they were with a not great digital cammera but those last pics are of my stock fan just to show im using it not liquid or phase change
SYSTEM
AMD64 3200@2.7ghz stock cooler
1gig Geil Value ram @ 470 3-3-3-5 1t
A8N-SLI Deluxe
Gigabyte 6600GT@580mhz/1.3ghz
120gig SATA Seagate
I have
ADA3500DEP4AW
CBAUC 0420SPMW
currently doing 250x10 = 2.5ghz at 1.6Vcore
here's a screenie
NOTE* in the screen shot prime still show 260x10 which is incorrect because i dropped it since i couldn't get it to prime stable. I changed the OC settings in windows and it didn't change prime's reading.
http://img.photobucket.com/albums/v.../2500stable.jpg
here is my other spec
Thermalright xp-90 with 92mm tornado
Abit AV8
Antec TrueBlue 480W
Crucial Ballistix 3200
Gecube X800XTPE cooled with zalman ZM80D-HP
SoundBlaster Audigy2 ZS
Raptor I x 1
WD Cavier SATA 120GB
3500+ Newcastle
ADA3500DEP4AW
CBAUC 0420SPMW
9763414F40037
Does 2400Mhz (240x10) stable @ 1.6v.
Ran a few Benches at 2500Mhz (250x10), but I cannot honestly call that stable.
A64 3500+ Newcastle 240x10 @1.55v
Abit AV8 Rev 1.1 BIOS 1.9
Mushkin 3200 222 (2x512)BH-6 2-2-2-5-1T@ 2.8v on 166 divider
Radeon X800XT PE
Fortron 530W
3200+ Winnie w/ stock heatsink and fan.
2450Mhz@ 1.55v (245HTTx10)
We just got done playing Call of Duty and Battlefield 1942 for three hours, with a benchmark here and there just cause they like to be ran. ..if I can game continuously until I decide it's bedtime (which we do nightly) without any problems, I would define that as "stable".
nice stuff. Try lowering the volts to say 1.45Vcore and do a 32m SuperPi. Should give ya better temps and suck less power from ur PSU
ADA3500DEP4AW
CBAEC 0427WPMW
3500+@2.7Ghz
DFI Ultra-D 3.10 non p BIOS
2 x 512MB OCZ 3200vx @ 1T 2-2-2-8 245Mhz @ 3.3v
x850xt PCIe @ stock
2 x 36GB Raptor (still get 10DE error so RAID is a no go)
Mad Dog 600w PSU (+3.3@3.4 +5v@4.99 +12v@11.89)
VapochillLS -47C/-33C idle/load
3200+ 0445 SPAW with Air cooled 100% prime95 Stable by 1.45 Vcore
Or 3000 MHZ 100% prime95 Stable on Mach2 GT , but only 1.53 real Vcore
DFI must be her
Last edited by STONKA; 03-26-2005 at 11:07 PM.
my personal last test validated
WC Home made
http://valid.x86-secret.com/show_oc.php?id=8691
and the FSB test ,i'll retry with 3,1xx Ghz just for fun
http://valid.x86-secret.com/show_oc.php?id=8681
French Overclockers roxxxxxx
OCM Team addict
nice speed but when you run large FFT's or blend test you're not stressing just the cpu... it'd be better to run small fft's...Originally Posted by STONKA
small ffts rock also 100% Stable
First i test small ffts than large ffts
Put my "ClawCastle" under the CPU cooler last night. Its a CAA2C 0506BPMW
3200Mhz super-pi 1-4m stable. 1.86v
Max in prime is 3Ghz .. diddn´t have the time to try any higher, but will do so tonight.
3200+ Venice
CBBLE 0519 DPBW
2.7 GHz (270x10) - 1.55v - 10 hours Primed
2.7 GHz (300x9) - 1.55v - 1 hour only (but should be the same)
31s on SuperPI.
I'll try 2.8 soon...
Regards,
AleX
Last edited by alexgontijo; 07-06-2005 at 03:43 PM.
AMD Athlon64 3200+ @ 300x9 | Venice 0519 | DFI LP NF4 UltraD
GSkill F1 2GBHZ DDR500 | BBA ATI Radeon X1900XTX 512 MB
Bookmarks