are you sure?Originally posted by K32A
Cool - The NF3 250Gb is 2 seconds faster at stockspeed than NF3 150
are you sure?Originally posted by K32A
Cool - The NF3 250Gb is 2 seconds faster at stockspeed than NF3 150
It's 42.96sec at 4444MHz.....Originally posted by CodeRed
Can you do a pifast with that CPU/mem combination
INTEL PWA FOR EVER
Dr. Who my arss...
.........
Cool, thanksOriginally posted by hipro5
It's 42.96sec at 4444MHz.....
If you are asking me, then i got it from my own experienceOriginally posted by bias_hjorth
where did you get this info?
Shuttle SN95G5 V2
AMD Athlon64 3000+ Winchester @ 2430MHz, 1.47vcore
Club3D X800Pro 256MB
1GB Kingston Value PC3200 @ 221MHz, 3-3-8-3, 2.7v
200GB Maxtor DiamondMax 10
NEC 3500A DVD±RW
Acer AL1715 17" TFT
could you show some results?.. 2sec sounds a tad too much that is..
"M-I-A"
With my Shuttle AN50R w. NF3 150 chipset and my A64 3200+ at stockspeed (2000MHz) it took 47 seconds at 1M...Originally posted by bias_hjorth
could you show some results?.. 2sec sounds a tad too much that is..
And at stockspeed with my Soltek Barebone w. NF3 250Gb it tkes me 45 seconds
Shuttle SN95G5 V2
AMD Athlon64 3000+ Winchester @ 2430MHz, 1.47vcore
Club3D X800Pro 256MB
1GB Kingston Value PC3200 @ 221MHz, 3-3-8-3, 2.7v
200GB Maxtor DiamondMax 10
NEC 3500A DVD±RW
Acer AL1715 17" TFT
dont think its the CPU there m8....
47sec stock is WAAY to slow..
nf150 + gigabyte + a64 3200 = 42sec stock here.. I think it should be around the same on the nf250 maybe a tad faster (1sec..)
"M-I-A"
Hmm, okay - When i ran the 1M with my 250Gb all the background programs were'nt closed, sooo - i dont know
Shuttle SN95G5 V2
AMD Athlon64 3000+ Winchester @ 2430MHz, 1.47vcore
Club3D X800Pro 256MB
1GB Kingston Value PC3200 @ 221MHz, 3-3-8-3, 2.7v
200GB Maxtor DiamondMax 10
NEC 3500A DVD±RW
Acer AL1715 17" TFT
look at this link http://219.113.251.125/c-board/c-boa...;tree=2598;id=Originally posted by bias_hjorth
could you show some results?.. 2sec sounds a tad too much that is..
I love XS
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
yes exactly my point allmost the same..
"M-I-A"
finally 34s @1M
MSI K8N Neo Platinum (vcore w/o mods up to 1,8V )
Nforce 3 250GB rulezz
no overclocking on this test.
3.4E@4.06 on DFI 875P lanparty pro rev"B"
1GB OCZ PC4400@ 3-4-3-5
6800Ultraextreme(450mhz/1150mhz) DEAD NOW FU** GAINWARD went out of bus, GOOD!!
36Gx2 Raptor Raid 0 on ICH5R
Koolance case everything else moded
Ultra-x 500W psu
Innovatec pump
!MAN DOWN!
3.4E@4442Mhz asus P4C800Delux-E
1GB OCZ PC4400@ 3-3-4-6 W/ddr booster 4.4vdimm
6800U (430/1200) 36Gx2 Raptor Raid 0 on ICH5R
300gbx2 Raid0 on ICH5R
OCZ520ADV PSU
600W Meanwell PSU for TEC
(437W TEC @-21C)
670@5G
2gb OCZ 666DDR2 2 4-4-4-8 @1.8v
2X 7800GTX BFG @(500/1350)
ASUS P5ND2-DELUX
4x 320U scsi raid10 18gb 15k RPM
500watt redundant server psu
it didnt atach my pic 44 sec
3.4E@4.06 on DFI 875P lanparty pro rev"B"
1GB OCZ PC4400@ 3-4-3-5
6800Ultraextreme(450mhz/1150mhz) DEAD NOW FU** GAINWARD went out of bus, GOOD!!
36Gx2 Raptor Raid 0 on ICH5R
Koolance case everything else moded
Ultra-x 500W psu
Innovatec pump
!MAN DOWN!
3.4E@4442Mhz asus P4C800Delux-E
1GB OCZ PC4400@ 3-3-4-6 W/ddr booster 4.4vdimm
6800U (430/1200) 36Gx2 Raptor Raid 0 on ICH5R
300gbx2 Raid0 on ICH5R
OCZ520ADV PSU
600W Meanwell PSU for TEC
(437W TEC @-21C)
670@5G
2gb OCZ 666DDR2 2 4-4-4-8 @1.8v
2X 7800GTX BFG @(500/1350)
ASUS P5ND2-DELUX
4x 320U scsi raid10 18gb 15k RPM
500watt redundant server psu
Pentium D 930 @ 4.0ghz / Intel 975XBX / 1GB Geil Ultra Series PC-6400 3-3-3-8 / eVGA Geforce 8800GTS @ 620/930 / SB Audigy 2 ZS / Maxtor SATA 250gb / FPC Modular Antec 550w TruePower / Lian-Li PC60 / Vantec Nexxus Rheobus
Originally posted by ZEROKOOL
it didnt atach my pic 44 sec
you need at least ten posts to make attachments
"M-I-A"
Something little:
Its few seconds too slow, because the board wont boot if GAT is set to any other setting than Auto. Also CPU NB Strap must be set to 800FSB, which is darn slow
4.6GHz / 1.6V prescotts heat dissipation is just too much, to R404 Mach2. Compressor is popping and squirling, when I put some load on it. Next I will try some DI for the cpu, and the board definately needs some soldering job
what should CPU NB Strap be set to for good super pi scores?
Overclocking made in Austria
533FSB would be the best, but it aint gonna happen with high fsb.
667FSB is also faster than 800FSB, but its also fsb limited
why? and with all intels?Originally posted by The Stilt
533FSB would be the best, but it aint gonna happen with high fsb.
667FSB is also faster than 800FSB, but its also fsb limited
Just playing around
I definatly need some new ram thou. This XMS C2 Pro Pc-3200 just isn't cutting it. No matter what I do it won't run past 220FSB.
Donate to XtremeSystems!
Workstation: Intel Core i7 4770, Asus Maximus VI Gene, 32GB Corsair Dominator Platinum DDR3-1866, eVGA SC GTX Titan, 256GB Crucial M4, Corsair HX850, Corsair H100i. Corsair Carbide 350D
Fileserver: 2x AMD Opteron 2425HE, Supermicro H8DME-2, 24GB DDR2-667, Supermicro 846TQ 24bay Chassis, Redundant 920w, 256 Crucial M4 boot, 20TB Storage
Notebook Asus Zenbook UX32VD-DH71, Intel Core i7 3517u, 10GB DDR3-1600, 256GB Crucial M4, Geforce GT 620M
try OCZ Platinum EB ! I get 256Mhz with my 3500 @ only 2,85VOriginally posted by WesM63
Just playing around
I definatly need some new ram thou. This XMS C2 Pro Pc-3200 just isn't cutting it. No matter what I do it won't run past 220FSB.
With the specs in my sig I get 37 seconds in 1M, too lazy to go redo it for a screenie Hopefully I can save enough money for a LS but first Id like a X800XT, and I need volt mods, but this is my main rig I dont want to be without it for very long.
P4C 3.2Ghz @ 4.2Ghz 1.8v (Vapo LS + 4 Tornados & 2xNexus)
AIW X800XT Running Stock
IC7-G w/ 2x 512MB KHX3000 (BH-5) + 2x 512MB Muskin Redline XP4000 BIOS 2.8
2x 36GB WD Raptors RAID 0 (ICH5R)
2x 80 gig Seagate SATA RAID 0 (SiI3112a)
Promedia 5.1 Ultra on Audigy 2 Plat
Pioneer DVR-108D / Lite-on combo SOHC-5232K
Lian-Li PC-65 w/ all 80mm tornado case fans & PC P&C 510w Deluxe
WinXP Pro
3d03: 14185
Your owned... your just owned by a computer from school...
Crashs while startin Adobe Acrobat...
dual ... quad ... hexal ... octal ... hexadecal?
just did this one... it can do more but need some other ocz EB :P
| 3.2EE @ 4.3 @ 1:1
|Asus p4c800-e @ *Vdimm mod* *Vcore drop mod *
| 2x512 muskin specieal *2225 @ 245fsb @ 3.3v*
| X800pro connect3d FFS forsinket !
| CPU colled By *Mach 2 ST*
| super tornado 400W @ *3.3v mod 3.8v*
If it doesn’t fit use violence – if it breaks it needed replace enyway
Nice Wiruz, how many volts are you giving your ram?
Overclocking made in Austria
Bookmarks