what comes after the week?
CAATC 0403YMPW?
what comes after the week?
CAATC 0403YMPW?
Overclocking made in Austria
TPMW IIRC, I'll check when I get home (at work ATM)Originally posted by EmineM
what comes after the week?
CAATC 0403YMPW?
thanks alot!!
Overclocking made in Austria
Nice SAE. Can't wait 'til I get a Prommy.
(Probably a Mach I that I can get cheap, will be R404a modded.)
Wonder what my chip will do prommy cooled...
Codered: Nice result... Server 2003 need to be tweaked. There are a thread about Server 2003 little back in this section, there you will find a 2003 guide.
Last edited by Endre; 05-19-2004 at 01:08 PM.
Yes. I am anxious what scores you could getOriginally posted by Endre
Nice SAE. Can't wait 'til I get a Prommy.
(Probably a Mach I that I can get cheap, will be R404a modded.)
Wonder what my chip will do prommy cooled...
Codered: Nice result... Server 2003 need to be tweaked. There are a thread about Server 2003 little back in this section, there you will find a 2003 guide.
But remember. The results I show are only to reproduce when ya fsb is as high as mine... FSB RULEZ
Sure.... but that will be hard with an NF7.Originally posted by SAE
Yes. I am anxious what scores you could get
But remember. The results I show are only to reproduce when ya fsb is as high as mine... FSB RULEZ
My current is dead. It wouldn't go higher than 249.6(x11) 2-2-2-11 CPU-int/APIC on anyway (stock cooler...), so I was getting tired of it. Hoping for a new one that does at least 253-255 without too much hesitation.
But 12.5x250 or 251 should probably be enough for 32s...
no better times since last try, but now with a nice HTT (and HT-Link @700mhz)
Yeah, the nf7 and apic sucked too, like the dfis. Seems to be the nf2 chipset/cpus limiting us.Originally posted by Endre
Sure.... but that will be hard with an NF7.
My current is dead. It wouldn't go higher than 249.6(x11) 2-2-2-11 CPU-int/APIC on anyway (stock cooler...), so I was getting tired of it. Hoping for a new one that does at least 253-255 without too much hesitation.
But 12.5x250 or 251 should probably be enough for 32s...
Do you think you could do 3.125Ghz with onnly a mach1 ?
I had evap temps around only -23°C at 2.85GHz and 2V, and cpu socket temps were over 24°C! I now have loaded socket temps of 18°C and evap at -52°C (12x255 priming, primed over the last night and still priming... :thumbsup: )
/edit.
@TM30
If your ram would be faster you could probably gain a second or two
The unit will be R404a (maybe R507) modded "of course". The CPU does 2800+ at 45-50C and my crappy low +12v line... we'll see what it will do with some nice temps and a decent PSU.Originally posted by SAE
Yeah, the nf7 and apic sucked too, like the dfis. Seems to be the nf2 chipset/cpus limiting us.
Do you think you could do 3.125Ghz with onnly a mach1 ?
I had evap temps around only -23°C at 2.85GHz and 2V, and cpu socket temps were over 24°C! I now have loaded socket temps of 18°C and evap at -52°C (12x255 priming, primed over the last night and still priming... :thumbsup: )
I'm pretty sure the chip will do at least 3,1 GHz with R404a Mach I.
Edit: Hm... I see umakemi's AQYHA did 3100 MHz with modded Prommy Mach I... only 2550 with air.
Last edited by Endre; 05-20-2004 at 09:05 AM.
Some chips perform well under phasechange, some don't...Originally posted by Endre
The unit will be R404a (maybe R507) modded "of course". The CPU does 2800+ at 45-50C and my crappy low +12v line... we'll see what it will do with some nice temps and a decent PSU.
I'm pretty sure the chip will do at least 3,1 GHz with R404a Mach I.
Edit: Hm... I see umakemi's AQYHA did 3100 MHz with modded Prommy (R404a Mach II?)... only 2550 with air.
I have an old 2400+ tbred b that does 2.4+ on air and 2.6 under phasechange only... so go figure.
And the 12V line does not much to the cpu. Going from 12.4V to 13V just brings more instability... Take a look after a good 5V line though. But I dunno if the nf7 uses the 12V rail more intensely than the dfi's do... And remember, it also depends on the board you're on... abits seems to get a bit higher cpu clocks but don't like high fsb the same time...
A thing I've noticed with this CPU is that it seems to care a lot about the temp, compared to a few other desktop XPs I've used. How it does with zubzero temps is another story though, but I have a feeling that it will do goood...
With NF7 the 5v line is not important at all... 12v is. It drops badly with 1,9v vcore and more, and I'm pretty sure it hurts my OC, at least a few MHz.
And the high CPU/FSB/vcore problems seems to be non-existent with the newer boards and bioses.
Last edited by Endre; 05-20-2004 at 05:54 AM.
Okay. I could only guess as my last nf7-s oc adventure was quite some time ago...Originally posted by Endre
A thing I've noticed with this CPU is that it seems to care a lot about the temp, compared to a few other desktop XPs I've used. How it does with zubzero temps is another story though, but I have a feeling that it will do goood...
With NF7 the 5v line is not important at all... 12v is. It drops badly with 1,9v vcore and more, and I'm pretty sure it hurts my OC, at least a few MHz.
Erm... do ya really think so??? Hehe. Iirc, there are many probs with newer boards just to reach fsbs higher than 225!!!Originally posted by Endre
And the high CPU/FSB/vcore problems seems to be non-existent with the newer boards and bioses.
Why I don't see scores like mine from all the mobile/nf7 users? All I have seen up to now were at 200-215MHz fsb to pass 3GHz
Originally posted by SAE
Erm... do ya really think so??? Hehe. Iirc, there are many probs with newer boards just to reach fsbs higher than 225!!!
I know it.
The max 225 boards are history now, thankfully. The latest boards are great. My first NF7 (really old) did 245-250 with multis below 11, but only 230x11... unmodded, vdd mod didn't help. With Tictac D10 bios.
My third (NB 0344) did 249x11... and 249x10... probably 249x8 aswell (maybe 250 ). With Tictac D2x bioses.
Because people have the old crappy NF7s, they either keep that or get DFI boards.Why I don't see scores like mine from all the mobile/nf7 users? All I have seen up to now were at 200-215MHz fsb to pass 3GHz
But, there are some, Dani with 253x12 or something like that for example...
Edit: That's with a desktop, but there is no such thing as NF7/mobile high FSB problems...
And soon, you have me with 25Xx12,5
Last edited by Endre; 05-20-2004 at 07:20 AM.
TheDude, Keeper, Jeff, all have probs at 3GHz+ and fsb higher than 215...Originally posted by Endre
Edit: That's with a desktop, but there is no such thing as NF7/mobile high FSB problems...
And soon, you have me with 25Xx12,5
...with old boards.Originally posted by SAE
TheDude, Keeper, Jeff, all have probs at 3GHz+ and fsb higher than 215...
Well. We'll see when I get my prommy.
OPP bought a new one one or two months ago, too. Could not get it higher than 238 stably!Originally posted by Endre
...with old boards.
Yeah. But like you said. We'll see, hehe
results updated:
finally a 28 sec score using an AN50R and win2k
Very nice! That's 1:1 2-2-2-5?
actuallyOriginally posted by Endre
Very nice! That's 1:1 2-2-2-5?
2.0-8-12-2-2-5-2-2-1-1 @ 3.6V 1:1
using K8NHA Pro bios (0319)
man thats just too many numbers to remember
Finaly.
24 sek fastest timings 3353 Mhz
Best OC Regards
Tom Holck
Denmark
The Homeland of nVentiv and Asetek
24s is not enough! :p
Just kidding, I wish you luck in getting 23 seconds and making a new world record.
Overclocking made in Austria
just Tom Holck
learn A.K.A JP
Tom Holck
VMOD the board to get close to 300 FSB maybe?
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
Very nice Tom...
Shuttle SN95G5 V2
AMD Athlon64 3000+ Winchester @ 2430MHz, 1.47vcore
Club3D X800Pro 256MB
1GB Kingston Value PC3200 @ 221MHz, 3-3-8-3, 2.7v
200GB Maxtor DiamondMax 10
NEC 3500A DVD±RW
Acer AL1715 17" TFT
Bookmarks