I got the SL9ZL stepping on my E6600, How good is that?
currently 3.4 55c load on my freezer7
I got the SL9ZL stepping on my E6600, How good is that?
currently 3.4 55c load on my freezer7
Mr Cape.
You night want to think about water cooling. Those temps under load are kinda high. I bet under water that chip has alot more in it.
Motherboard: EVGA T1
CPU: E6600 L646G494 @ 3.7Ghz. 1:1 Ratio Linked & Synced Voltage 1.44 Load temps 45c
SPP:1.45volts, MCP: 1.50volts
Memory: Mushkin PC2 8000 4-5-4-11, 2T Voltage 2.1
Swiftech Water Cooling H20-220
Video: One EVGA 8800GTS 320MB
Power Supply: Silverstone 750W
OS: XP Pro
57c is not high for c2d in load. 60+c and thats starting get pretty high.
LD PC-V8 | i7 3930K |Asus Rampage IV Extreme| G.Skill Ripjaws Z | Sapphire 7970 | Acer GD245HQ |OCZ Vertex 2 E 120GB | Intel 510 120GB | Cooling XSPX RX480, XSPC RX360, Swiftech MCP35X-XSPC res top, EK Supreme HF Copper,T-balancer mCubed bigNG |
Yeah Orthos cranks the temps but that's nothing really. I never hit more than 61c in Orthos. My gaming load in Oblivion with highest settings/antiailiasing is 42c in RMClock. Core temp 40c.
There's a lot of differing opinions about what temps these conroes can handle but I'd cut it off if it got over say 64c. That's my assumed safe limit.
Last edited by mrcape; 06-14-2007 at 09:31 AM.
My Heat
i5 2500k @4.5ghz Raystorm
Asus P8Z68-V Pro/Gen3 16gb(4x4) G.Skill PC12800 Ripjaws X
x1900xt MCW60
Rad: Thermochill PA120.3 3YL SL/ Pump: DDC2 w/ Petra's top 7/16in ID masterkleer
Corsair 120gb Force GT SSD/ 1TB WD Black Caviar SATA
X-Fi music/SH-203B/H62L/LH-20A1L
Corsair HX620w /Acer AL2223W/modded TJ07
Yeah I noticed that too, there's a pretty steep rise in temps once you go over 1.32v or so. I guess it's part of the deal to get that last couple hundred mhz.
I can say that I'm very happy I bought this one instead of a random newer batch. Then again those GO chips are looking awesome now too. Haha, time marches on...
One more screen @ 3.7...
Last edited by mrcape; 06-14-2007 at 01:34 PM.
Alright, last one for today but I still want to go more -
3.8ghz -
CPUZ Validation
My Heat
i5 2500k @4.5ghz Raystorm
Asus P8Z68-V Pro/Gen3 16gb(4x4) G.Skill PC12800 Ripjaws X
x1900xt MCW60
Rad: Thermochill PA120.3 3YL SL/ Pump: DDC2 w/ Petra's top 7/16in ID masterkleer
Corsair 120gb Force GT SSD/ 1TB WD Black Caviar SATA
X-Fi music/SH-203B/H62L/LH-20A1L
Corsair HX620w /Acer AL2223W/modded TJ07
I did some browsing and did the screen cap in photoshop. It seemed fine, so fast, but I didn't want to try orthos.
Dropped back to 3.6 to do some work. Man running this speed really makes you realize when you make a user error, there's no pause. Just mouse clicking and tabbing around is so instantaneous like woah, where did that app go.
Last edited by mrcape; 06-14-2007 at 03:50 PM.
[QUOTE=mrcape;2252962]Alright, last one for today but I still want to go more -
3.8ghz -
mrcape, I totaly forgot you had one of the F chips. Yes they do get warm mighty fast. Congrats on the 3.8Ghz on air. Amazing!!! I will be trying 3.8Ghz today hopefully. Will let you all know how it goes.
Motherboard: EVGA T1
CPU: E6600 L646G494 @ 3.7Ghz. 1:1 Ratio Linked & Synced Voltage 1.44 Load Temp 45c
Idle Temp. 25c
SPP:1.45volts, MCP: 1.50volts
Memory: Mushkin PC2 8000 4-5-4-11, 2T Voltage 2.1
Swiftech Water Cooling H20-220
Video: One EVGA 8800GTS 320MB
Power Supply: Silverstone 750W
OS: XP Pro
My L706A499 is @ 3.7 1.42 VCore. I am working on stability with my ram now to try get higher clocks.
---------------------------------------------------------------------------------------------------------------
MV-G
3770K 5.00
7970 1200/1700
GSkill 2400
Seasonic Platinum 1000
Silverstone TJ08-E
- Koolance AC-370 - Swiftech MCP-35X - Phobya Xtreme 200mm Rad - Koolance VID-AR797 -
---------------------------------------------------------------------------------------------------------------
USA National Debt
You are using the badaxe while he is using a P35 board, so far there seems to be a big difference in the abilities of the P35 when it comes to OCing the E6600s in that it typically takes lower vcore to achieve the same OC. Though Spi times indicate the P35 not to be significantly (if any) faster than say a P965 it does seem to allow for lower voltages.
ASUS P8P67 Pro Rev3; Intel 2600K; GSkill Ripjaws 1600 (2x4GB); XFX 5870; WD Black 500G x2 Raid0; Silverstone Striker 750W; SwiftechApogee-XT-TC PA120.3-Swiftech MP655; Lian Li G70B; Win7-64
------------------------------------------------------------------------------------------------------
The clueless don't even know they are.
Two things are infinite: the universe and human stupidity; and I'm not sure about the universe. -- Einstein
HEAT
My Heat
i5 2500k @4.5ghz Raystorm
Asus P8Z68-V Pro/Gen3 16gb(4x4) G.Skill PC12800 Ripjaws X
x1900xt MCW60
Rad: Thermochill PA120.3 3YL SL/ Pump: DDC2 w/ Petra's top 7/16in ID masterkleer
Corsair 120gb Force GT SSD/ 1TB WD Black Caviar SATA
X-Fi music/SH-203B/H62L/LH-20A1L
Corsair HX620w /Acer AL2223W/modded TJ07
Today i got my new L709A964. It´s an funny one. I can boot with 3.6ghz and 1,3v but it isn´t primestable at 1,48v. Maybe it´s benchstable but first i want to get it primestable. Always if i start prime core 0 runs fine but core 1 makes trouble. But the temperature ist much better than the temperature of my L629B.
My 744G can even boot into windows at 3.8 at 1.45, but I can't get the damn thing to run at 3.6Ghz not even at 1.55 real vcore, temps go way up to 65°C now, so I lapped the CPU, to see if I can nibble some degrees off... I settled before at 3.4 due to temps...
At the moment running Intel TAT at 3200mhz at 1.35 Vcore both cores read 40°-43°C out under my thermalright Ultra 120. Will have to let the AS5 settle , then try more Vcore again and hopefully the lap job did something...
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
I have a very late E6600
L789A269 :O
Cooling:
http://i6.photobucket.com/albums/y21...th2/Ghetto.jpg
Swiftech Storm G4 CPU block
Swiftech MCP655 1200lph pump
BIX Stealth 240 with 2x 120mm 100cfm panaflo's
1/2" clearflex
23C ambient most of the time
GeaR:
E6600 L789A269
Gigabyte 965p DQ6
Radeon HD2900XT
Audigy2 ZS sound
Silverstone Zeus 650w
I acheived 3350MHz when I was on stock cooler, stock vcore (was 1.344 loaded) 8 hours orthos stable with 54C loading temp
On the water:
3712Mhz 1.54v loading (1.6 BIOS set)
http://i6.photobucket.com/albums/y21...3700-prime.jpg
http://i6.photobucket.com/albums/y21...h2/pi-4050.jpg
Fails after a few seconds in orthos at anything over 3.89 with 1.6v under load.
+.20 on Mch
+.20 on FSB
F9 BIOS
Cheers
Q9650@4288 10.6sec 1m superpi water ||Asus P5Q Deluxe||4Gb Ballistix Tracer red||4870X2||Corsair1Kw
L639F027
It needed a lot more V to get benchable at this speed, but with H20 and a bit more juice I think this could be a 3.8 benchable one
3580MHz
399*9
1.55V
Ram just stock 2.2V
GFX stock.
PI 1M is the newest there.
http://kirkedam.mine.nu/kwk/Data/Ove...ofarsogood.JPG
Last edited by Kallenator; 06-17-2007 at 04:00 AM.
Aber ja, naturlich Hans nass ist, er steht unter einem Wasserfall - James May
Hardware: Gigabyte GA-Z87M-D3H, Intel i5 4670k @ 4GHz, Crucial DDR3 BallistiX, Asus GTX 770 DirectCU II, Corsair HX 650W, Samsung 830 256GB, Silverstone Precision -|- Cooling: Noctua NH-C12P SE14
L645G337
Chip is definately a volt hog
3.42 (380 x 9) @ 1.53v bios, 1.50v droop full load
VID=1.35v
ran 24hrs stable Orthos blend
runs Small FFT's at 55 C. with lapped tuniq and ihs.
idles @ 30/32 C.
Intel E6600/Lapped L645G337 @ 3.42 x 9 multi
Lapped/Sunbeam Tuniq 120
Asus P5N32-E SLI
BFG 8800 GTX OC2
2gb OCZ PC2-8500 SLI 2x1 GB Micron D9GMH (B6-3)
2 X WD Caviar SE16 X 500GB
Coolermaster Stacker RC-830 Black
PC Power and Cooling - Silencer 750 Quad
Ok, I have 3.9GHz Benchmark stable, yet to prime it.
I have 3.8GHz prime stable with 1.57 REAL vcore under load. (same V as used to run 3.9GHz benchmarks)
Q9650@4288 10.6sec 1m superpi water ||Asus P5Q Deluxe||4Gb Ballistix Tracer red||4870X2||Corsair1Kw
I bought a 630F from Tank Guys, I just got it going today and it passed OCCT @ 3816 1.55 vcore. I have not got a chance to do much with it but it will run SuperPi @ 4Ghz and boot into windows but it take 1.65vcore
I never tried the Vcore higher then 1.55 on the 630F because on that rig I'm on air and temps were way up even though the Vid was lower ... so I sold it, I played with the 744G, also heating up like a madman over 3400mhz, so I lapped it and now it's 3600Mhz stable at 1.49 Bios setting which corresponds to 1.48 real volts on my P5K under load...
Gonna lap my 632A too and see i I can gain some degrees there...might hit the 4ghz barrier with some incredible luck....
Last edited by Leeghoofd; 07-02-2007 at 07:48 AM.
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
Kallenator I have the same E6600 as you (L639F027). Unfortunately that CPU requires a lot of voltage I can't even boot it with 400x9 and now I'm working to have it stable at 355x9 Do you have any tips for that CPU?
▪ RocketFish FullTower Case
▪ DFI LanParty UT 680i LT SLI-T2R/G (N5FD320 BIOS) | Thermalright HR-09S Type 3
▪ Q6600 3000Mhz (9x333)@stock | Thermalright Ultra-120 Extreme + Noctua NH-P12 +Arctic Cooling TX-2
▪ 4x1GB Cellshock CS2221440 D9GKX 667Mhz@stock
▪ 2xSeagate Barracuda 7200.7 ST3120827AS 120GB SATA NCQ [RAID0] | 2xSeagate Barracuda 7200.10 ST3160815AS 160GB SATA II NCQ [RAID0]
▪ BFG NVIDIA GeForce 8800 GTX OC [SLI] | Samsung SyncMaster™ 205BW 20.1"
▪ Creative Sound Blaster X-Fi XtremeGamer Fatal1ty Pro | SpeedLink Medusa 5.1 ProGamer Edition (SL-8973)
▪ Silverstone Olympia OP1000
▪ MS Vista x64 sp1/Gentoo ~AMD64
Gaming Rig stable at 4G. Able to boot and play at 4.32G (9x480) but not Orthos Stable.
Stability: 11 hours+ Orthos Blend stable
CPU name: E6600
OC: 4050MHz
Stepping: 6 B2
Week: L709
Code: A442
Vcore: 1.65V (Bios) 1.58v (vdroop)
Cooling: Vapor Phase
Cooler brand/model: Vapochill LS
Motherboard: EVGA nForce680i SLI A1
Bios Version: P28
Operating System: XP 32
RAM brand: Corsair TWIN2X-6400C4
RAM rated speed: PC6400
RAM actual speed: 800
Latency: 4-4-4-12-2T
Vddrs= 2.1v
__________________
CPU - INTEL C2D E6600 @ 4.05GHZ 9x450 @ 1.6V (L709A442) w/ Vapochill LS -40c idle -33c load
Motherboard - EVGA nForce680i SLI A1 W/P31 BIOS
Memory - 2GB (2x1GB) Corsair TWIN2X-6400C4 @ 800Mhz 4-4-4-12-2T
Video -EVGA 8800Ultra 768MB 650/2376 Hard Drive - 2x150gb Raptor SATA2 10K RAID 0
OS - Windows XP x32/x64 Power Supply - PC Power & Cooling 750w Silencer SLI
Monitor - Dell 2707WFP 27" Widescreen
Are there any good 6600s still on the market? The ones with 1.23v base setting or just low temps?
Bookmarks