New E6600 batches, post your Overclock

[before]

We have 8 E6600 L709A436 right here @ixtremtek.com

Among others here are some Watercooling results:

- MAX FSB: 555MHz

- CPU-Z: 4284MHz @1.65v DMM

http://valid.x86-secret.com/show_oc?id=201100



- OCCT: 3702Mhz (529*7) at 1.485v DMM (1.50v speedfan)





- OCCT: 3802Mhz (475*8) at 1.585v DMM (1.59v dans speedfan)





If not the best, that's at least one of the best actual batches.

[rbsmontemor]

L652B255:





Lapped Ultra-120 (not extreme) + Panaflo

Ambient: 19ºC

Best E66 ever to use daily with aircooler (look at these temps!)

Rbs

EDIT: 3600 @ 1.43, 3700 @ 1.50...still testing.

[sofarfrome]

L652B255:

Lapped Ultra-120 (not extreme) + Panaflo

Ambient: 19ºC

Best E66 ever to use daily with aircooler (look at these temps!)

Rbs

EDIT: 3600 @ 1.43, 3700 @ 1.50...still testing.

very nice...you got a good one

[rbsmontemor]

very nice...you got a good one

Runing Prime95 (dual core version) at 3800Mhz @ 1.55v now.

Will post later


Hey, is your E66 L629B hot? I aways have "A", this is my first "B" and its much more cold than my others

Bye

Rbs

[sofarfrome]

Yes, my B is hot but much better after lapping and water

[rbsmontemor]

Maybe my E66 has a broken temp sensor, but:



Ultra-120, 21ºC ambient

Rbs.

[Maxxpower]

someone with an L643G batch/FPO?

nobody?

[Deux]

just got an L652B.
Anyone else have one I can compare it to? I'll test it when my P5K arrives this week.

[0DIGy]

rbsmontemor ->

3705MHz with 1.5V and 19°C ambient your CPU's temperature is 53°C
3800MHz with 1.55V and 21°C ambient --> 52°C

it's definitely wired

[GazC]

I've just bought a L701 C574 E6600 from a computer fair today for £120

Just need the mobo and ram now, will post results when I get up and running.

I got myself a Gigabyte P35-DQ6 and with a bit of playing got to this:



This is Orthos stable, I have run around in windows at 3.7Ghz but Orthos doesn't last a minute even with upto 1.6v. I think that my waterblock is getting saturated with heat by this point.

I'm currently running at Vcore of 1.54375 (selected - don't know what real is)

Ram is OCZ 7200 Platinum XTC SLi edition. I've just played with the timings and dividers to get this speed, I do not know what half the memory options do on this board! Vdimm is 2.25v (selected - again cannot seem to measure real on this board)

CpuZ verified:

http://valid.x86-secret.com/show_oc?id=202155

I'm not sure if this is good or bad, I know I've seen other guys hitting these cpu speeds on air. btw, due to running the 8x multi I'm actually getting 2025fsb, is this a good result?

[chaos_being]

Well, I finally have a 24hr Orthos Blend overclock on my L644G425- 3.4ghz (9x378) @1.49v. I don't think I'm going to go any higher than that... the temps are actually still pretty good (I haven't seen it go over 50c,) but I don't want to have to put over 1.5v into it. Definitely not an overclocking monster, but at least I got an extra 1ghz out of it.

For days now I thought it was my ram being finicky, but it seems that I just needed more vcore to be stable through a blend test, versus a small fft test. I'm testing an overclock on my ram, and then it'll be time to actually use my computer again, heh.

[dnottis]

I'm testing an overclock on my ram, and then it'll be time to actually use my computer again, heh.

I know the feeling - Im just getting stable primes and maxing my OC with a new 6420, can't wait to USE the PC again...

[Speed4life]

Hello everyone! Just wanted to say I love all the info about these E6600 Batch codes. I currently have a L646G494 and it's running pretty nice so far. I am currently @ 3.6Ghz. Temps Load=42c Idle=22c. I will get more info posted as soon as I figure out how to post all my screen shots. LOL.

Spec:
Motherboard: EVGA T1
CPU: E6600 @ 3.6Ghz. 1:1 Ratio Linked & Synced Voltage 1.41
Memory: Mushkin PC2 8000 4-5-4-11, 2T Voltage 2.1
Swiftech Water Cooling H20-220
Video: One EVGA 8800GTS 320MB
Power Supply: Silverstone 750W
OS: XP Pro

[Speed4life]

Hello everyone! Just wanted to say I love all the info about these E6600 Batch codes. I currently have a L646G494 and it's running pretty nice so far. I am currently @ 3.6Ghz. Temps Load=42c Idle=22c. I will get more info posted as soon as I figure out how to post all my screen shots. LOL.

Spec:
Motherboard: EVGA T1
CPU: E6600 @ 3.6Ghz. 1:1 Ratio Linked & Synced Voltage 1.41
Memory: Mushkin PC2 8000 4-5-4-11, 2T Voltage 2.1
Swiftech Water Cooling H20-220
Video: One EVGA 8800GTS 320MB
Power Supply: Silverstone 750W
OS: XP Pro

Ok I think I figured out the screen shots.

[Richie P]

Ok guys, how am I doing?

3.6Ghz / 1.44v / 51 deg loaded @ 20 deg ambient

Lapped Tuniq, lapped Xeon 3060 - 7638A563 batch (56 degrees before lapping).

Will push higher now I've lapped, but think my G.Skill's+XBX (2.2v max ) are limiting me on 1:1 divider 1066 strap.

Any suggestions?

[rbsmontemor]

Ok guys, how am I doing?

3.6Ghz / 1.44v / 51 deg loaded @ 20 deg ambient

Lapped Tuniq, lapped Xeon 3060 - 7638A563 batch (56 degrees before lapping).

Will push higher now I've lapped, but think my G.Skill's+XBX (2.2v max ) are limiting me on 1:1 divider 1066 strap.

Any suggestions?

2.2v I can run my HZ's at DDR950 4-4-3-4 on my BX2.

[Hazzan]

@Deux : Run it !!! I still waiting this report....I have one same weeks but Xeon 3060 on the way in my Place.........

[Lu523]

I have a L652B255 that came in today to replace the one that I killed. Here is what I have so far.


Forgot to mention ambient is 25-26.

[Deux]

my L652B does 3200 at 1.36-1.38 and is 24 hr orthos blend stable


Havent had much time to test 3600 yet. it ran for ~6 hours at 1.43v before I stopped it,
I'll let it run tonight/tomorrow and see of it is stable.

[sreedx2]

Maybe my E66 has a broken temp sensor, but:



Ultra-120, 21ºC ambient

Rbs.

NOD32 , my 6600 does the same thing as yours the cpu temp is always higher or very close to the core temp by 2C or so ? what is up with that

my 6600's core temp is also very cool

[Speed4life]

Ok I just hit 3.7Ghz. Load temps were 50c. Voltage is 1.44. Now I will see if I can tighten up my memory timings.

Spec:
Motherboard: EVGA T1
CPU: E6600 L646G494 @ 3.7Ghz. 1:1 Ratio Linked & Synced Voltage 1.44
SPP:1.45volts, MCP: 1.50volts
Memory: Mushkin PC2 8000 4-5-4-11, 2T Voltage 2.1
Swiftech Water Cooling H20-220
Video: One EVGA 8800GTS 320MB
Power Supply: Silverstone 750W
OS: XP Pro

[Ten]

Just orderd an xeon 3060 + Asus P5K dlx m-b. Hope i will get a good cpu.

[SoCalDJ]

User Name: SoCalDJ
Stability: 5 Hours 19 Mins 24 Secs Orthos Small FFT Stable

CPU: E6600
OC: 3.612ghz 516x7
Stepping: 6 B2
Week: L644
Code: G231
Vcore: 1.5375 in Bios, 1.49 idle in Windows, 1.44 full load in Windows

Cooling: Water
Cooler brand/model: Danger Den TDX

Motherboard: Gigabyte GA-965P-DS3
Bios Version: : F10
Operating System: XP 32bit

RAM brand: OCZ
RAM rated speed: 1066mhz
RAM actual speed: 1032mhz 1:1
Latency: 5-5-5-15

FSB: 2056
Temps: Idle 20c Full Load 45c

Including 2 pics, second one is memory stability at these speeds.




Haven't been able to get it much higher even with a 9x multi. Figured I'd go with the 7x and see how much fsb I could get .

[lowfat]

My 711A will do 3GHZ, 1.225V stable on water. And 3.6GHz, 1.55V stable on water. Is bench stable @ 3880MHz, 1.65V with ambient temp @ ~15˚C.

[cliffy]

I just got an L629F116 delivered from Tekheads.co.uk waiting for me at home cant wait to have a play with it after work. Just out of curiosity what is FPO