I think its safe to say that the Tforce 550 ver 1.3 is a much better board than the ver 1.0 because the ver 1.0s I had (two of them) didn't like much above 275 htt but these are friendly well beyond that.
I think its safe to say that the Tforce 550 ver 1.3 is a much better board than the ver 1.0 because the ver 1.0s I had (two of them) didn't like much above 275 htt but these are friendly well beyond that.
Well I have seen plenty of people get past 275HTT on a 1.0 board (including myself, I was doing 305HTT), but I do agree that the 1.3 is an overall better board. The main reason is that they changed the vdimm power supply from a linear supply to a switching one so that the mosfets don't get incredibly hot.
Gigabyte MA790X-UD4P//Dell Latitude D620
Phenom II BE 940//Core 2 Duo 2.0Ghz
2x2GB OCZ Reaper//1GB PC5400
640GB WD Blue//80gb 7200 rpm hdd
Radeon 4850//Geforce 7300 Go
Crunching for Comrades and the Common good of the People.
That the fighting between AMD and Intel will be just as fierce as the fanboy fights here. that way we all get the best CPU's for cheap.
amd cpu's just keep getting cheaper and cheaper
Asus Crosshair III
Phenom X2 550@X4
Cooler Master V10
2x2gb G-SKILL DDR3
ASUS HD 4890 Top
Antec 850w
WD 500gb
WD 80gb
I'm about to build a 3rd system based on this combo and I will post the results. Here is an exact components list.
MB BIOSTAR TFORCE 550 GF550 AM2
CPU AMD|A64 X2 3600+ AM2 1.9G 65N
PSU CM|RP-550-PCAR 550W RT
HD 250G|WD 7K 16M SATA2 WD2500KS
DVD_BURN LITE-ON|LH-20A1H-185 BK
ADD CARD SYBA|SD-VIA-FW1E1H 1394A R
CASE COOMAS|CAC-T05-UB BLK/BL RT
CARD RD ROSEWILL|RCR-103 RTL
512Mx2|WINTEC 3AXT6400C5-1024K
KINGWIN|BA-12
And a EVGA GeForce 7300 GT 256MB
I will lap all the heatsinks to 600 grit and the IHS and reapply with Arctic Silver 5.
I got Version 5.0
It is labeled ad SE so that has to be good
Link to pics and results will be here by saturday
http://justoverclockit.com/pics/T-Force550/
Gotta say that's an awesome combo, ive been strugling to get the money for a cheapo C2D setup (on budget due to ex-wife ripping me off lol), aint gonna do that after seing this thread, hell i may even be able to afford a new gfx aswell, too bad i cant order one of those combos as im european, but price difference aint that big tho, will be interesting putting one of them cpus to the test with some serious wc
I5 2500K @ 4.9GHz - 1.45V
Antec H2O Kühler 920
ASRock Extreme 3 Gen 3
2 x 4GB Corsair Vengeance LP
XFX 5850 BE 775/1125
Corsair TX 750W
2 x Raptor 36GB @ Raid 0
2 x Samsung F3 1TB
The same exact settings and the same exact results. This one however boots at 333 HT. so that gives it a speed of 3170. I have no time to test it to the bleeding edge. So thats 2 for 2 at 2.85 GHZ 24/7 Stable and one at 2.5 GHZ stable (the one with the 400 watt cheap power supply.)
Here
I love that temp. 38C orthos Lapped the heatsink and the IHS to 600 grit
Last edited by Ruslan; 03-25-2007 at 02:44 PM. Reason: Forgot to add something
Nice, you aren't going to try for 3ghz? Mine seems to hit a brick wall at 306HTT, anything further than that is just completely unstable.
Gigabyte MA790X-UD4P//Dell Latitude D620
Phenom II BE 940//Core 2 Duo 2.0Ghz
2x2GB OCZ Reaper//1GB PC5400
640GB WD Blue//80gb 7200 rpm hdd
Radeon 4850//Geforce 7300 Go
I tried 3 GHZ but that not 100% thats like 80% stable (Runs orthos for ~15 minutes and crashes randomly under load.) This speed is good for this hardware and so no complaints. I don't have the computer anymore so no more testing until I get another order.
Yes I got it from the egg along with the new 3600+. I didn't pay attention to the PCB physically but it seems to be capable of running at higher HT speeds more stable. For example I was able to boot at 333 X 3 no problem. on the previous board that didn't happen no matter how I begged so it is a good sign. go back to my earlier pics and compare them, with the new one see if you can spot something. I'll do that right now maybe I'll spot something. The reason why I didn't post the pics of 333 x 3 is because it was not stable. If it is not 100% stable it is useless and totally pointless. I would also like to point out that these systems feel "snappier" than C2D systems because of tighter timings and a better memory architecture on AMD's part. releasing this CPU is the best thing AMD has done this year.
The settings in the BIOS are identical.
color me jealous. I ordered mine 3/8 and it was the 1.3. Maybe I can get them to let me return this one! lol
oh I have been testing. This combo does seem to be stable at 3GHz (while its still early spring anyway).
Thing is to run a 3GHz. I have to run my DDR2-800 (Corsair 6400C4) ram at DDR2-600 though with 2.1 volts. The divider is set to 400 and if I move it to 533 it won't boot. And I'm not going to give this ram 2.4. When I ran at 2.38GHz I could run the ram at DDR2-950 at 2.1 volts!
im having similar issues with ram and the cpu. I can get to 2.85 ghz fine on the 533 divider but 667 wont work. Funny mem controller.
Does anyone know what is the closest board available that is most similar to the BIOSTAR TFORCE 550 GF550 AM2 board as it is not available in AU
Thanks anyway but found after a search, looks like a great rig for the price and I will definitely look at this option the next build
Last edited by alpha0ne; 03-25-2007 at 11:55 PM.
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
Bookmarks