I had a 300FSB "wall" on my E4300, then I updated my AW9D to a bios that supports 1333 strap natively. Selected that and it's at 333*9 (3GHz) at stock volts atm.
I had a 300FSB "wall" on my E4300, then I updated my AW9D to a bios that supports 1333 strap natively. Selected that and it's at 333*9 (3GHz) at stock volts atm.
I hope by Natively that means No Mods to the cpu? If so when I get a cheap stick of ram that does 1.8v I can set the bios(Hopefully, as I put a Noctua NC-U6 NB heatsink on Mine and the Noctua is solidly mounted as It doesn't move), As My current ram won't boot below 2.1v(2GB OCZ PC2-8000 Gold GX xtc[2x1024MB]) and being I have the old 1.3 Bios and not the New 1.4 Official Bios(Unless I'm wrong the Bios version won't make any difference here in this case, Can't flash It with ram that doesn't get enough voltage). I'd cleared the cmos as I had a QX6700 cpu on this motherboard at one time with a multiplier of 12, If the multiplier had been set at 9 It could have booted.Originally Posted by Nephilim
Last edited by JokerCPoC; 03-06-2007 at 01:54 PM.
PC1: QX6700 _B1(ES) cpu @ 2.98GHz, Asus P5K Deluxe(812 Bios) w/one GTX295 card...
PC1(Replacement): i5 750 cpu @ 2.66GHz, Asus P7P55D Pro[Under Construction]
To get bsel1=Low, why not connect to bsel2 which is already in L?
Manufacture Consent
Plz excuse my ignorance, but I gather that the 266/1066 mod definitely works for the e4300, but does the 333/1333 mod work? Any word on either mod with the e4400? Thanks.
i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
Asus P8P67 Vanilla
Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
Diamond HD 7970
WD 600GB Velociraptor
Corsair TX750W
CM 690 II Advanced
Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762
G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839
is there a list anywhere of mobos this works on? I only have P5B-DLX and it doesn't work.
I would love to find a good mAtx board to use for budget builds.
mod works great, thanks
Asus Crosshair III
Phenom X2 550@X4
Cooler Master V10
2x2gb G-SKILL DDR3
ASUS HD 4890 Top
Antec 850w
WD 500gb
WD 80gb
I did bsel mod on my E4300 Q643... with silver and they work, defult boot at 266, but I don't get any improvement on fsb. Before and after bsel mod wall is 405 fsb. Board is biostar 965pt with 0404RH bios.
So for a e4300 is it better to run a 1066 strap or a 1333?
Also does this only work with p965 boards and not 650i?
no pen for me on my e4300
Last edited by Evilsizer; 04-26-2007 at 05:40 AM.
Intel Pentium G3258 | ASRock Z97M OC Formula | Samsung 2x4GB DDR3-1600 | Galaxy GTX660 GC | Samsung PM840 Pro 128GB, PM830 250GB FDE |
"I Love To Camp!"
"Comensing Shock Therapy!"
HeatWare
Well...does it work on a P5B Deluxe or not?
Because i want to buy a E4300 today...and i want to do the mod directly after i bought it...
i tried a e4300 on my p5wdg2 ws pro and it seems my vcore is locked to auto with this cpu ? i tried the mod with conductive pen don't work yet , i tried it twice . i am going to go grab a window kit today and try that . i can get the cpu to 3ghz with vcore on auto but thats about it . never heard of not being able to set my vcore . is this cpu vcore locked or something ? will i have to pin mod for vcore also ?
e8500 8x500 1.55v
ga-p35-ds3p
crucial ballistix 2x2gb
seagate 7200.10 3x320 raid0
xfx 8800gts
st75f 750w
li-lian rocketfish
fuzion...dd d5...pa120.3
here's the 1333 fsb mod , plus i'll be trying 1.41v mod also .
http://forums.pcper.com/showthread.php?p=4044451
e8500 8x500 1.55v
ga-p35-ds3p
crucial ballistix 2x2gb
seagate 7200.10 3x320 raid0
xfx 8800gts
st75f 750w
li-lian rocketfish
fuzion...dd d5...pa120.3
Hi guys
I have an e4300 (Q635A165) and for every multi I have a different FSB WALL (because i think that it's this the problem!)
with 6x max bootable is ~417 of FSB
with 7x max bootable is ~364 of FSB ()
with 8x max bootable is ~415 of FSB
with 9x max bootable is ~414 of FSB
With vcore default I can get until ~350(x9) of FSB
BTW my daily now is 400 x 8 = 3,2GHz @ 1,36v with ram in syncronous at 4-4-4-11 @ 2v on Asus Commando
400 x 8 = 3,2GHz with ram in sync at 4-4-4-11
This is a screen with my e4300 and my previous Intel D975XBX
3662 mhz | E4300 | Q635A165 | 1.518V | Air (Scythe Ninja)
Now my question is: with this mod can I break my strange FSB WALL?
HC7650W~Lc-PowerTitan560W~Noiseblocker(2S1+1S2)~NorthQ3709BL :: Core2DuoE4300~ScytheNinjaPlusRev.B :: AsusCommando :: 2x1GBDDR2MicronD9DQW :: BuiltByATIX1900XT~ZalmanVF900-Cu :: Maxtor160GB SATA~Maxtor250GB ATA@TechsoloTMR-3550 :: NecND-3500AG :: PinnaclePCTV :: LogitechG15~MX1000 :: CambridgeSWFPS1000 :: Samsung959NF :: EpsonR300 :: AliceADSL~DigicomMic.Home54
My E4300 FSB Wall with mult 8 is 385, with this mod, i can get FSB 400 x 8 1:1 ?
I think nobody can tell you straight away - you have to test it yourself and let us know
| '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
| '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
| '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67
| '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
| '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
| '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
| '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled
| '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW
Originally Posted by saaya
I tried last 6 different bios for biostar 965pt 103, 119, 119RH, 119RH2, 0404, 0404RH and result is same, fsbwall on ~405 fsb . Neither bios won't boot 400 fsb with 6x, 7x or 8x multi but 9x work ok. Several bios just don't like lower multi than 9x on 350-400 fsb. I'll try another ram and 914 bios but it's small chance to change something.
EDIT: I try 914, 914RH, and 103RH bios and still nothing .
Last edited by Dekara; 05-06-2007 at 06:40 AM.
Usual suspects: i5-750 & H212+ | Biostar T5XE CFX-SLI | 4GB RAndoM | 4850 + AC S1 + 120@5V + modded stock for VRAM/VRM | Seasonic S12-600 | 7200.12 | P180 | U2311H & S2253BW | MX518
mITX media & to-be-server machine: A330ION | Seasonic SFX | WD600BEVS boot & WD15EARS data
Laptops: Lifebook T4215 tablet, Vaio TX3XP
Bike: ZX6R
HC7650W~Lc-PowerTitan560W~Noiseblocker(2S1+1S2)~NorthQ3709BL :: Core2DuoE4300~ScytheNinjaPlusRev.B :: AsusCommando :: 2x1GBDDR2MicronD9DQW :: BuiltByATIX1900XT~ZalmanVF900-Cu :: Maxtor160GB SATA~Maxtor250GB ATA@TechsoloTMR-3550 :: NecND-3500AG :: PinnaclePCTV :: LogitechG15~MX1000 :: CambridgeSWFPS1000 :: Samsung959NF :: EpsonR300 :: AliceADSL~DigicomMic.Home54
Does this mod work with 650i or does this wall only appear with p965 chipset?
Confirmed this mod works for the e4300 and ecs p4m800pro v2.0
cpu boots at 266 x 9 default and can be oced to 300fsb.
2.7 ghz for a $100 mobo+cpu combo at frys. This was during the frys anniversary sale. I must say, such a sweet hometheater pc.
Bookmarks