Results 1 to 9 of 9

Thread: Setting up x850 Crossfire.

  1. #1
    -150c Club Member
    Join Date
    May 2005
    Location
    Northeast, USA
    Posts
    10,090

    Setting up x850 Crossfire.

    I have a p5wd2 premium (bios 0606) and now x850xt and a x850 crossfire.
    I have the crossfire card in the 1st slot (blue) and x850xt in the black spot. Cable is connected correctly I beleive and all and to my monitor. The system recognizes both cards in the properties menu for screen selection. But it does not let me enable crossfire in CCC.
    It says my cable is not connected correctly.

    Any ideas?


    If you have a cooling question or concern feel free to contact me.

  2. #2
    Xtreme Addict
    Join Date
    Sep 2004
    Location
    Fantasia
    Posts
    1,297
    Crossfire card goes in the bottom slot. Sure, I'm sure.
    ebay under aws983s, heatware under Mr. Tinker.

  3. #3
    -150c Club Member
    Join Date
    May 2005
    Location
    Northeast, USA
    Posts
    10,090
    I got no video on boot with crossfire in lower slot.

    EDIT: GOt it, all new drivers and yay.
    Last edited by n00b 0f l337; 04-21-2006 at 10:38 AM.


    If you have a cooling question or concern feel free to contact me.

  4. #4
    Xtreme Addict
    Join Date
    Sep 2004
    Location
    Fantasia
    Posts
    1,297
    http://enthusiast.hardocp.com/articl...hlbnRodXNpYXN0

    I know it's not your board, but check the second paragraph.
    ebay under aws983s, heatware under Mr. Tinker.

  5. #5
    -150c Club Member
    Join Date
    May 2005
    Location
    Northeast, USA
    Posts
    10,090
    Yeah p5wd2 premium is 16x 4x I beleive. Well its working, 3.2 @ stock, x850's at stock is 8k in 3dmark05.
    Time to build the liquid chiller and finish the DD.


    If you have a cooling question or concern feel free to contact me.

  6. #6
    -150c Club Member
    Join Date
    May 2005
    Location
    Northeast, USA
    Posts
    10,090
    WR on Orb is only 10636, I think I'll crank that one up.
    If I oc one card with atitool will the other set as well?


    If you have a cooling question or concern feel free to contact me.

  7. #7
    I am Xtreme
    Join Date
    Apr 2005
    Location
    Upstate, NY
    Posts
    5,425
    Quote Originally Posted by n00b 0f l337
    WR on Orb is only 10636, I think I'll crank that one up.
    If I oc one card with atitool will the other set as well?
    No, you have to select each seperate card in Settings iirc.

    Good luck NoL!

    Nick
    Core i3-550 Clarkdale @ 4.2GHz, 1.36v (Corsair A50 HS/F) LinX Stable
    MSI H55-GD65 Motherboard
    G.Skill 4GBRL DDR3-1600 @ 1755, CL9, 1.55v
    Sapphire Radeon 5750 1GB
    Samsung F4 320GB - WD Green 1TB
    Xigmatek Utgard Case - Corsair VX550

  8. #8
    pepsi fiend
    Join Date
    Jun 2005
    Location
    La Verne, ca
    Posts
    1,000
    actually its http://service.futuremark.com/compare?3dm05=1864881 from me. should be easy for you to beat as i was on air. and i believe fugger has 12k and some change for crossfire.
    Last edited by einCe; 04-21-2006 at 05:14 PM.
    Lanparty Ultra-D DEAD|REVIVED
    X2 3800+ LDBHE 0606 EPMW 2950 @ 1.55v DEAD|STILL DEAD
    Powercolor X1900XT 725/873
    dell 2005fpw 20.1''


    Quote Originally Posted by afireinside
    "uh yeah is this DFI RMA dpt? yeah I was setting up your ultra-d motherboard last night and the pwm shot a flame at me... can you give me a new one?"
    Quote Originally Posted by Mr. Popo
    if you wont eat all of your vegetables einCe will come and get you!

  9. #9
    Muslim Overclocker
    Join Date
    May 2005
    Location
    Canada
    Posts
    2,786
    Didn't macci do 16k with x850XT crossfire

    My watercooling experience

    Water
    Scythe Gentle Typhoons 120mm 1850RPM
    Thermochill PA120.3 Radiator
    Enzotech Sapphire Rev.A CPU Block
    Laing DDC 3.2
    XSPC Dual Pump Reservoir
    Primochill Pro LRT Red 1/2"
    Bitspower fittings + water temp sensor

    Rig
    E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB


    I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.



Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •