w00t w00t and with POS Volcano 7 and STOCK voltage
Think this is good or should i trade it out for a UPWM and use it on my watercooling?
1700+ Dlt3c Xpwm
w00t w00t and with POS Volcano 7 and STOCK voltage
Think this is good or should i trade it out for a UPWM and use it on my watercooling?
Damn guy, you got a killer chip bump the voltage wc it and let it fly! I've ordered a cpui but they ar ewaiting for a new batch so i hope i'll get a good stepping
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings.
Av by FrischThis is not a Lime tree
Im trading this chip for a UPWM b/c ive seen better results on those such as the 2.6Ghz one on air, im gonna order the final parts of my waterrig later today, so its gonna be fun times
well I think that's pretty good for stock voltage
bump the vcore to 1.8 and see what she'll do
if you can get 2.4-2.5ghz I think that's good
over that is cake and not a given no matter what number/letter core u get as far as I know
it's never fast enough!
Well, we'll see what happens
I think it should be XPMW and UPMW (not WM) yes?
twiztdskatr why don't you try your chip on your wc sys with some more voltage before trading it?
ps Ewok you're right
Last edited by antipop; 04-15-2003 at 01:22 PM.
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings.
Av by Frisch
i second that. plus those Xpwm seems to like voltage more than otherOriginally posted by antipop
twiztdskatr why don't you try your chip on your wc sys with some more voltage before trading it?
ps Ewok you're right
irc://irc.quakenet.org/xtremesystems
Join now !
I was getting someone else to order it for themselves, then i would trade chips with them...Ill let him try out his own chip first.
Why not a 1.5v WPMW?
I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me.
Hunter S. Thompson (1939 - 2005)
my cpu was fine at 2200mhz as well. stock 1.5v was all it needed. 2500mhz needs more than 2.15vcore.
I just ordered one yesterday!Originally posted by TheDude
Why not a 1.5v WPMW?
1700+, 8RDA+, TwinMOS BH-5, ATi 9800 Pro, WD 100GB 8mb, Antec TruePower 430w, Black Chieftec Dragon
I also have a xpwm 0310
Its sick, also doing 2,2G´s @1,5 (real 1,52)
Im waiting for 512megs OCZ PC3500 to bump in next week, then itll go higher im confident bout that :P
/Steffan
A7N8X dlx|1700+ JIUHB DLT 0310XMPW@2518 (209x12)|WC cooled by Maze 2|1x512 PC3500 OCZ EL|Antec cabi with 3x80mm fans @5V and 430W TP PSU
I got an 0308 SPMW XP1700+ DLT3C here in my 8RDA+ running at 2500 with 1.85v. Prime 95/3dmark stable.....tried two other of the same stepping.....one hated any voltage over 1.7v, but ran at 2400 with only 1.675v, the other went to 2300mhz at 1.75v.
May pick up another today to try out!!
same problem as i got with my 0307 DLT3C bito, it just hangs as soon as i try and do anything with it at anything over 1.7v.
and at 1.7v it only does 2200 stable.
I got a DUT3C and even that does 2300 at 1.89v so im getting more out of that than i can out of the DLT3C!!
I think is just pot luck, pick any DLT3C JIUHB and pray its a good one, i dont think looking at any of the other stepping info makes any difference what so ever.
pretty much any DLT3C does gnarly ass overclocks
OK....picked up another one today...same 0308 SPMW....currently running Prime95 at 12.5 x 200, 2500mhz at 1.85v.
This one again is ok with higher voltages. Will be gunning for more later!!
What du u guys think of a 0311 XMPW?
My 0308MPMW isn´t så fun, only 2 ghz stabel on 1.5v
bito what cooling you using on that at 1.85v? and what temps?
mine is doing 2455 at 1.825v but just wouldnt do 2500 at all even at 1.9v, i think it may be psu or temps stopping it. i keep getting MACHINE_CHECK_ERROR bsod's all the time.
I have 2, 0310 XPMW's, got them for the kids' boxes. Initial testing for both indicated 2.25 @ default voltage and a maximum of 2.5 @ 1.85 volts. Temps were pushing 52C with an AX7 and an 80mm Delta SHE. I only ran both chips for an hour or 2 on an AT7-MAX2. Maximum FSB obtained on that board was 205 for both procs. One more thing, temps went through the roof when volts were increased to 1.95.
Overall not too shabby?
pfoot
EWOK.....i am using Swiftech Q-Power watercooling.
This was on my now deceased 8RDA+....just got my NF7S V2.0, so having a play with it now.....undervolts quite a lot compared to what you put in the bios!!
hi
0308 XPMW watercooled
prime95 2646 @ 1.94v (mbm) and 2620 @ 1.9v
wc + ice
screen max
http://membres.lycos.fr/ftpad/images...ICE2792MHz.png
Last edited by Learn; 04-28-2003 at 11:07 AM.
learn A.K.A JP
im just trying to work out exactly how im getting load temps of 61c with an SLK900 and 92mm 47cfm papst at only 1.825v and yet everyone else reports far lower temps than that even with more voltage.
ive reseated it twice, even tried shinetsu crap instead of as3. cant work it out and its driving me mad as temps are holding it back a lot.
open the case side and temps drop 10c even though ive got 2 intakes on full speed and an exhaust in this pc60.
If your temps drop 10 degrees when you take the side cover off, that suggests to me that something is wrong with the air flow inside the case. Try playing with your fans, change location, reverse direction of flow, etc. Maybe try one fan blowing in at front and 2 blowing out in rear? Are you wires and ribbons neat? Any restrictions on airflow? Something must be wrong to get a 10 degree drop when you take the cover off?
I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me.
Hunter S. Thompson (1939 - 2005)
What kind of fan are you using in your case? Maybe they're not powerful enough
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings.
Av by Frisch
Posting Permissions
Reply With Quote
Bookmarks