Radgrillz 3x120mm w/ PA120.3

[Khanhfucious]

Does the RadGrillz 3x120mm Grill work with The ThermoChill PA120.3? IIRC The PA has more spacing in between the fans.

http://www.performance-pcs.com/catal...oducts_id=3701

[Sparky]

Read the bold text

RadGrillz have been found to work fine with Hardware Labs (Black Ice) and Swiftech Radiators but, not the Thermochills.

This will fit though, it is made for the Thermochills

http://www.performance-pcs.com/catal...oducts_id=4339

[Khanhfucious]

Wow I completely missed that.

The "Made for ThermoChill" one is ugly.

[ChongL]

Wow I completely missed that.

The "Made for ThermoChill" one is ugly.

yea it is...if only a black radgrills would fit I would be all over it

[thunderstruck!]

Wow I completely missed that.

The "Made for ThermoChill" one is ugly.

Just paint it black.

[ChongL]

the shape is whack too...and the middle portion of each grille has a thicker bar that makes it look out of place (i think it has some wording there but it shouldn't be there)

[Marci]

Better pix here: http://www.thermochill.com/fg120.php

The center bar is same size as fan center hub... so it covers the majority of the fan's sticker. Orifice should match majority of fan frames to cover as much of the fan's frame as possible so all you end up seeing is blades, but without obstructing the frame venturi which'd restrict airflow of the fan.

Done in mirror effect to compliment styling of Storm G4.

RadGrillz are designed to protect an exposed core in rectangular orifice. Ours are designed as FanGrills to protect fingers from fans mounted in blowholes (ie: assuming fans are between radiator and case).

[Khanhfucious]

I sent an eMail to ACRyan asking if they were going to make ThermoChill Stripes RadGrillz.

In the meantime, Imma not cut my case, cause I dont wanna cut it and end up having the hole too big for the RadGrilll (If it ever comes...OR I can visit the Waterjet)

[granulf]

How much of a difference is it between the mounting holes of the thermochill pa 120.3 and a bix 3? I just fitted a bix 3 with a acryan bricky radgrill, and the holes didn't align. The holes on the radgrill were too wide(the distance between each hole), so it might fit the thermochill after drilling out the holes?

[JoeBar]

U can measure it yourself. Look here.