I have seen no higher X1900 AIW here, but I know someone with conroe will end up higher than me
CPU and GFX are air cooled, stock small heatsink @ AIW.
Pic:
Compare:
http://service.futuremark.com/compare?2k1=9019773
Heatsink:
I have seen no higher X1900 AIW here, but I know someone with conroe will end up higher than me
CPU and GFX are air cooled, stock small heatsink @ AIW.
Pic:
Compare:
http://service.futuremark.com/compare?2k1=9019773
Heatsink:
Last edited by fhpchris; 08-03-2006 at 10:42 PM.
Nice job man Knew you'd get it!
Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250
Looking @ the stickies, this is a WR untill someone runs one with conroe...
Going to install a stock XT heatsink soon
Can you do a 05 or 06 run? Nice scores
Main rig:
CPU: I7 920C0 @ 3.6Ghz (180*20)
Mobo: DFI UT X58 T3eH8
RAM: 12GB OCZ DDR3-1600 Platinum
GPU/LCD: GeForce GTX280 + GeForce 8600GTS (Quad LCDs)
Intel X25-M G2 80GB, 12TB storage
PSU/Case: Corsair AX850, Silverstone TJ07
I will get 03/05/06 done once the new cooler goes on, I dont have Pro liscenses, so I cant keep temps down on those
This stock cooler is HORRIBLE!
nice score..
im getting the same VC, hope to get the same results.
keep us updated!
what voltages are you running it at?
very nice card.
i5 2500k @ 4.6GHz - Corsair A70 | Biostar TP67B+ | G.Skill RipJaws DDR3-1600 2x2GB | MSI HD7950 TF3 | X-Fi Titanium | WD 750GB Black | CM 690 II - Corsair TX850 | 2xDell 2407WFP A04/A03 | Win 7 Pro x64
http://www.heatware.com/eval.php?id=48222
1.3v core and 2.119 on ram, but I am hitting a very bad temperature wall...
The stock cooler on this thing is horrible....
Hopefully I can do a good 700+/650+ run with the new cooler...
i always wondered how this card would oc since it has a reduced number of voltage regulators compared to the XT/XTX. i dunno if it'll be capable of 1.425v on the core like the rest of the X1900 family, but i'll let you decide on that
hopefully the new cooler will net you some more mhz, if not you can always go aftermarket/water.
Good luck!
i5 2500k @ 4.6GHz - Corsair A70 | Biostar TP67B+ | G.Skill RipJaws DDR3-1600 2x2GB | MSI HD7950 TF3 | X-Fi Titanium | WD 750GB Black | CM 690 II - Corsair TX850 | 2xDell 2407WFP A04/A03 | Win 7 Pro x64
http://www.heatware.com/eval.php?id=48222
Originally Posted by aiya
I thought it actually had the same number? Either way, 1.5v is available in ATI tool, and thats what I plan on using...
Running anything over 1.3v in ATITOOL eventually will lock up, even if the clocks are stable at lower voltages, and heat isnt an issue.
Newer results will be posted tonight
Impressive, Wish ida got the one I ordered for 149 a few months back, it was a typo but some ppl actually got theirs
I wasnt one of them..
Join the XS WCG team and do your part to help save the world..
^^^Click here to start folding for the soon to be number one team in the world..^^^
Main rig: Gigabyte DS3/6300@3.2 7950 GX2/Server:Expert/165@2.9/PCI vid/Wifes:ASrock Dual SATA2/3800@2.4/X800XTAIW/Kids:165@2.7/X850XTPE
"A computer beat me in chess, but it was no match when it came to kickboxing"
-Emo Philips
3d01:42586
http://service.futuremark.com/compare?2k1=9022185
Trying to get 3d03 to pass, but it is a tough bench.
3d03: 18429
No pic of 3095 + ram tweak, here is 3030 + untweaked ram
http://service.futuremark.com/compare?2k3=4902620
Ordered one @ $194. COuldn't resist Will be doing water XD
Unapproved link in signature. Signature has been removed.
Please read the forums rules and guidelines. They are at the top of the forums.
Edited by IFMU
For refrence, my GT1 in 3D03 is exactly the same as AFI's Opteron 170 @ 3.2ghz.
That is about the same ammount of CPU power I have, for comparison reasons...
Now you will be able to hit 40k 3d01 and record TV @ less than 200$Ordered one @ $194.
Hell yes Now all I need is a better cpu... hard to buy new stuff with gf >.<
Unapproved link in signature. Signature has been removed.
Please read the forums rules and guidelines. They are at the top of the forums.
Edited by IFMU
nice they jsut had this for 149 but now OOS. how high does the ram go?
what volts are u using to reach 702/666(im taking it this speed is just for benching)? can you do 05 results please?
i had the x1800 aiwand it was great and i dont mind picking this up.
Asus p5n-e sli
E6300 stock heatsink
2 x 1 ddr667 supertalent 5-5-5-13 2.1
X1800xt 256mb
Enermax liberty 620
Volts:
1.3/2.119/2.119
I have not even tried other volts on ram, but the ram will start to artifact at 684 mhz.
Using more voltage on core than 1.3v made it unstable, and only marginally helped.
I could run 3d01 for hours, and ive made it through 03, but I dont know exactly how stable it is 24-7 gaming...
running 05 soon
can you crossfire these with xpress 3200?
Current 24/7 settings
Delidded L628B e6400@ 3.6ghz 1.38v
3.9ghz 1.56v dual prime, 4ghz dual 32m pi stable on water and P5B Deluxe
Patriot 667 LLK @ 970 mhz 4-4-4-4 2.3v
x1900xt 690/780
Well, I have a DFI RD580 and a Mastercard.. I could try, but.. I think there was a problem that someone else listedOriginally Posted by menlatin
quick 05 run
http://service.futuremark.com/compare?3dm05=2152207
Wow nice scores for the card. I'm wondering though, is it worth it over a X1900GT? I know this has the full 48 pixel shaders and 16 pixel pipes but overclocking wise, it seems like the X1900GT can hit higher core and especially memory speeds. I at first wrote off the AIW because it seemed like the relatively slow RAM was holding back performance. What rating is the RAM by the way? 2ns or 1.4ns?
I'm sort of debating the two.
1.6ns ram.
I am trying some higher vmem on card, trying to get 693 on mems stable.
3D05:
http://service.futuremark.com/compare?3dm05=2152461
3D03:
http://service.futuremark.com/compare?2k3=4907163
More is left, voltage is at 1.3/2.160/2.124
Core and mems start to artifact at 704-706 mhz. I put a 80mm fan blowing on the PWMs on the card, as they were getting 95c+
I might be able to run more core voltage now...
Bookmarks