E6700 L647g

[kayl]

Stock vcore 1.35v had orthos stable around 3.2-3.3ghz.for 30mins.
i was running as much as 1.66v on air into this cpu, and die temps only 60c tops 32m SPi runs??? i re-mounted 3 times to get that though. The mobo is Asus P5b Deluxe with C2 chipset. I have done the vmods so vcore is rock solid, what I set in bios is what I have load. I managed a 32m run at 1.51vcore 3.6ghz. needed volts after that to go any higher, not even anther 100mhz.







It should be orthos stable @3.6ghz with 1.55vcore had it do 10mins this morning with small Ftt's. .Tried a quick run 3.65ghz with 1.66vcore, its getting hot now. Not the best cpu though really needing so much volts to clock this high

[Solarfall]

wow the chip actually needs that much volts to @3.65ghz...

[theteamaqua]

haha E6600 at 4GHz gaming stable n1

[kayl]

wow the chip actually needs that much volts to @3.65ghz...

it doesnt look good does it, we shall see what it does on phase change soon though

[Solarfall]

haha E6600 at 4GHz gaming stable n1

hehe yep i'm able to reach +4ghz speeds ( actually 4090ghz now, but whos counting ) i'm using 1.5v not that bad is it ,but with 1.6 it's +3 hours orthos stable if i remember right. now where's that freaking sreenshot

[kayl]

i was having issues running 1:1 got stuck at 4.1ghz and 1.75vcore. Bump to 1.82vcore and now closer to 4.4GHZ with 32m SPi and Wprime at around -30c.










Wprime

[sreedx2]

Stock vcore 1.35v had orthos stable around 3.2-3.3ghz.for 30mins.
i was running as much as 1.66v on air into this cpu, and die temps only 60c tops 32m SPi runs??? i re-mounted 3 times to get that though. The mobo is Asus P5b Deluxe with C2 chipset. I have done the vmods so vcore is rock solid, what I set in bios is what I have load. I managed a 32m run at 1.51vcore 3.6ghz. needed volts after that to go any higher, not even anther 100mhz.







It should be orthos stable @3.6ghz with 1.55vcore had it do 10mins this morning with small Ftt's. .Tried a quick run 3.65ghz with 1.66vcore, its getting hot now. Not the best cpu though really needing so much volts to clock this high

looks close to my 6600 is that 1.55v loaded, idle or bios ?

[kayl]

looks close to my 6600 is that 1.55v loaded, idle or bios ?

thats 1.55v in bios, also loaded and idle as well all vmods done on this mobo

[kayl]

Cascade run = 4895MHZ validation

http://valid.x86-secret.com/show_oc?id=196810

4699MHZ 1Mb SPI run @ 10.922sec

[sparkY1000]

Nice!! What Vcore did it take?

[Pinmod]

i'm always shocked when i'm reading a thread and somebody says - mine does 4+ ghz and then i see they are on phase or whatever

[kayl]

Nice!! What Vcore did it take?

for the validation 1.87v
but SPi i was doing 1.82vocre. i also can do around 4.57ghz SPI 32m and wprime. Have to upload some benches later.

[_G_]

i'm always shocked when i'm reading a thread and somebody says - mine does 4+ ghz and then i see they are on phase or whatever

yea but he started with a chip that on air was average at best

[kayl]

Highest FSB I could get was 520 1:1
For benching I used 1.82vcore, no droop experienced at load with with the dual core.

32m SPI 13m 02sec @ 4555MHz, booted at 10x 400 and FSB to 455MHZ.



WPRIME results 32m@ 19sec 1024M @ 611sec

[theteamaqua]

taugh power what?? wahts ur PSU

almost beat 13min there !! keep going

btw hows "cascade" different from phase?? what temp does it provide??

[IluvIntel]

taugh power what?? wahts ur PSU

Its a Thermaltake Toughpower series

[Solarfall]

lol 1.8 vcore... i thought that my 1.65v was overkill. well then again you do have the cooling power for those kinds of volts.

[kayl]

lol 1.8 vcore... i thought that my 1.65v was overkill. well then again you do have the cooling power for those kinds of volts.

i run those sort of volts both single stage and on cascade units
the cpus love it

[theteamaqua]

yea how many watts??

[Solarfall]

i run those sort of volts both single stage and on cascade units
the cpus love it

damn i need to get my self one of those ...my chip is the same, it just loves voltage, but i don't have the nerve to go higher than 1.65v.

[kayl]

yea how many watts??

the power supply is the 700w version, there is also 750w.
with dual core i get 0 droop on vcore, i do get droop of quad core though, no matter what i set the vdrop 50k resistor pot 2

damn i need to get my self one of those ...my chip is the same, it just loves voltage, but i don't have the nerve to go higher than 1.65v.

i always go by die temps, if you have a bad mount pc crashes. will only have a cpu 6months so voltage wont kill the cpu in that time

[Solarfall]

i always go by die temps, if you have a bad mount pc crashes. will only have a cpu 6months so voltage wont kill the cpu in that time

kayl same here. i usually buy a new cpu every six moths and torture the bejesus out of it.