Any non deluxe Asus p5b vdrop pencil mods.
Thanks
Any non deluxe Asus p5b vdrop pencil mods.
Thanks
||Asus P5B||Celeron 420 320*8||1GB RAM||Samsung 24IN LCD||Seti@HOME||
||XFX 680I LT||No CPU||2GB RAM||Seti@HOME||-Down
||PSP||PS3||Wii||iPhone||Mac Mini||LCD-TV||2-LAPTOPS||Z5500||
I see you've posted in the vanilla mod thread. Read through all of it.
E8400 8x500=4000 | ABIT IP35-E
2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1
Merom 13x133=1733 1MB L2 0.950V
I finished this mod and it works like a charm. vdroop is now 0.00035 or around there. but the only problem i have is when i set my vcore in bios (1.2225) -- it shows 1.18 on cpu-z and every other program (NOTE- THIS IS WITHOUT LOAD). so i have a vdroop already without load. hm.. dunno if that'll affect my system but it surely sucks.
E8400 @ 4.2Ghz.|Vcore- 1.36|P5Q-E|SunBeam CoreContact|Vdimm- 2.2|
G.Skills |PC2-8000 @ 600|eGeForce 8800GT|2X Saegate Barracuda 500GBS| CoolMaster CM690|600W Enhance PSU
Okay, I also did it with a 4B pencil!
I wasnt bothered to take out the mobo from the case, since I have a pretty steady hand...
Tough there was not much room for my fingers and the pencil so I had to be really careful, and just barely could touch the SMD with the top of the pencil, so it needed a few LIGHT strokes (like 7-8) till I get done!
Now vdrop is 0.008V!
Before the mod it was 0.045-50V!
ASUS P6T Deluxe V2
INTEL74 CORE I7 920 D0 (3924A346) 20*180MHz ~ 1.176V @ SCYTHE MUGEN2
3*1GB MUSHKIN XP3 @ 1440MHz CL7-7-7-21 ~ 1.60V
ZOTAC GeForce GTX260 @ 650/1300/2400MHz ~ ARCTIC COOLING ACCELERO GTX280
CORSAIR VX-550W
>>Micron D9 based RAMs and Electromigration<<
HUNGARY
Bookmarks