Forward: official GIGA 965P-S3/DS3/DS4/DQ6 beta BIOS

[korruptedone]

There is a lot of variation between the different board temp sensors, so don't expect any real accuracy (my 1st and 2nd DS3 has 15c temp difference on the same CPU/Cooler).

I'll agree here. I was idling 20 C at stock, which I'm pretty sure is almost impossible since it'd have to be damn cold in my house to be that low.

Gonna try out this F4E after I max out the F3 BIOS. Just got my rig together last night. The PIO mode thing is annoying and I can't install any games until I fix it (using RAID games drive), but I'm gonna miss not having to clear the CMOS on a failed o/c.

[dualshock]

from post #7 haltechs mirror site

steve b, mind posting the link?

[Lestat]

how about you go back to the page and find it. is it truly that hard to click back to the first page ?



anyone else having issues with any of the bios's getting to 1000mhz on the ram ?
my gskill HZ's cant do over 925-ish without getting a ton of errors.
nothing i do helps....

[RonTheMan]

ive got a leadtek 7800GTX on a DS4 with F3 Bios.
Just resets itself every time i change anything, this is with 2.1V on Vdimm and Team Xtreem 6400 kit

I have a DS4 which does the same thing. Perhaps you could try using a VGA cable connected to your graphics card using a DVI to VGA adapter. I tried that and that works for me.

[kenofstephen]

DS3 @ F4e , I did it today~

[Lestat]

Ken,

can you ask your guys if they are seeing any issues with the DS3 with memory past 900mhz.

i have tried 3 different kits of ram, and one of them is the Gskill HZ. and nothing i do makes them stable past 900-925mhz Dram.
The cpu multi does not matter, the fsb setting doesnt matter, voltage... CAS none of that matters, single channel or dual channel, 2 sticks or 1. nothing works.

can you ask the gigabyte guys if they know about this and if there is a fix or possible fix ?

[kenofstephen]

Ken,

can you ask your guys if they are seeing any issues with the DS3 with memory past 900mhz.

i have tried 3 different kits of ram, and one of them is the Gskill HZ. and nothing i do makes them stable past 900-925mhz Dram.
The cpu multi does not matter, the fsb setting doesnt matter, voltage... CAS none of that matters, single channel or dual channel, 2 sticks or 1. nothing works.

can you ask the gigabyte guys if they know about this and if there is a fix or possible fix ?

i am having the same problem as yours

[Lestat]

i am so upset.
i spend 250 USD on this Gskill HZ and i cant even use it past 900mhz
WTF!

[kenofstephen]

i am so upset.
i spend 250 USD on this Gskill HZ and i cant even use it past 900mhz
WTF!

yes, damn!

my super talent costs me more than $200 too!

[aldamon]

Man, cold booting really sucks with F4e

[Chri$ch]

i flash back to F3 (DS3) because with F4E it is not stable with same settings

[ocZZZ]

should have kept your 180$ team that you ordered - I'm up to ddr1040 speeds now. F4e has been the first bios that everything is 100% stable with - thanks gigabyte

[Lestat]

hhmm
wierd guess i have a bad board.

but im still one of the few that can do 400 FSB 24/7 @ 9x multi and cold boot too lol.
so slow ram good cpu clocks ? hhmm

anyways...

i wonder if they will RMA it since the baord cant handle it and most other people can ?

[soki]

OK I found the correct f3d version for ds4!
The new bios really fix the CAS bug! yupi!


what else fixes according to the website:
09.08.06
GA-965P-DS4 - BetaBIOS Version F3d
1. Fix 3D Problems
2. Fix RAID/AHCI Problems
3. Fix Memory Problems

How I found it:
http://gathering.tweakers.net/forum/...ssages/1152555
http://www.jzelectronic.de/jz2/index.php -> Neue BIOSe von Gigabyte (965P-DS3, 965P-DS4, 965P-DQ6 usw...)

Direct link to bios(remember to extract it cause is in .exe) : http://www.jzelectronic.de/jz2/Download2/965pds4f3d.exe

[kenofstephen]

should have kept your 180$ team that you ordered - I'm up to ddr1040 speeds now. F4e has been the first bios that everything is 100% stable with - thanks gigabyte

but this BIOS resulting in lower FSB than F3.

[Pjoeloe]

kenofstephen, please ask Gigabyte if they can put back the fewture ( F3 bios had that ) that if the board is not stable while booting with a to high OC, you don`t have to manual reset the bios but you can boot with a safe clock. This is a pain in the ass with the new F4E.... thanks

[BottomsUp]

kenofstephen, please ask Gigabyte if they can put back the fewture ( F3 bios had that ) that if the board is not stable while booting with a to high OC, you don`t have to manual reset the bios but you can boot with a safe clock. This is a pain in the ass with the new F4E.... thanks

that's wierd because i've never had this problem with any of the Bios's. Mine just reboots and goes back to stock clocks.

[|SiLA|]

i still have no luck with my ds4 with 6400 and ocz 7200 d9 chips

sometimes it posts and after a reboot it doesn't..just keeps the cycle without doing post dunno what's wrong anymore i even tried all the bioses f2 f3b c and d but still no luck

[dualshock]

OK I found the correct f3d version for ds4!
The new bios really fix the CAS bug! yupi!


what else fixes according to the website:
09.08.06
GA-965P-DS4 - BetaBIOS Version F3d
1. Fix 3D Problems
2. Fix RAID/AHCI Problems
3. Fix Memory Problems

How I found it:
http://gathering.tweakers.net/forum/...ssages/1152555
http://www.jzelectronic.de/jz2/index.php -> Neue BIOSe von Gigabyte (965P-DS3, 965P-DS4, 965P-DQ6 usw...)

Direct link to bios(remember to extract it cause is in .exe) : http://www.jzelectronic.de/jz2/Download2/965pds4f3d.exe

thanks soki, you're the best

[The_Hardstylez]

i still have no luck with my ds4 with 6400 and ocz 7200 d9 chips

sometimes it posts and after a reboot it doesn't..just keeps the cycle without doing post dunno what's wrong anymore i even tried all the bioses f2 f3b c and d but still no luck

Yuh, I have that problem too, It constant boot and than reset himself. It needs a bios reset to get it normally.

GA-965P-DQ6 - BetaBIOS Version F3g
1. Fix Overclocking Problems

Hmz, what meens fix overclocking problems...

[|SiLA|]

Yuh, I have that problem too, It constant boot and than reset himself. It needs a bios reset to get it normally.

well my problem is worst

since i can barely make post

tried many times the clr cmos..removed batt etc..no help
when i press the power button it just keeps rebooting itself

then after like 20 times of this cycle sometimes it post..i go to the bios just for test then i reboot..and no post again..everything @ stock..i even tried to oc same thing

it's like the mobo has some hardware problems dunno yet

[ClockCatcher]

well my problem is worst

since i can barely make post

tried many times the clr cmos..removed batt etc..no help
when i press the power button it just keeps rebooting itself

then after like 20 times of this cycle sometimes it post..i go to the bios just for test then i reboot..and no post again..everything @ stock..i even tried to oc same thing

it's like the mobo has some hardware problems dunno yet

Maybe its faulty, so maybe RMA it?

[tuoho]

So G.Skill 2GBNR memory works now with DS4, when new bios came out? Can anyone verify this?

[|SiLA|]

Maybe its faulty, so maybe RMA it?

jah that what i've tot

but i've tried 2 DS4..same crap and 2 6400

going to change it september now since the shop is closed for summer vacation

and i'm using atm the P5B and here i have trobules with divider

looks like my conroe moments sucks

[vkbms]

jah that what i've tot

but i've tried 2 DS4..same crap and 2 6400

going to change it september now since the shop is closed for summer vacation

and i'm using atm the P5B and here i have trobules with divider

looks like my conroe moments sucks

oh ....i'm not alone....

Have you tried different ram?

PS: aggiungimi in msn se lo usi....