FX-57 0516WPMW meets Kayl Black Frozen SS

[eva2000]

Full pics
http://i4memory.com/phasechange/kayl/arrived/1/html/
http://i4memory.com/phasechange/kayl/arrived/turnedon/
http://i4memory.com/phasechange/kayl.../NF4_UT_SLIDR/
http://i4memory.com/phasechange/kayl...F4_UT_SLIDR_2/

Yeah baby sub 21min! But man look at -20C idle cpu temps at 3515Mhz at 1.6v with load around -3C to -6C!



managed suicide run with cpuz @3645mhz at 1.728v but after got the run bsod LOL



Okay in an effort to find my ram's max limits for Super Pi 32M decided to drop the cpu multiplier and clock up the ram.

12x260mhz 2-2-2-0 7-12-0212 at 3.48v
&
12x266mhz 2-2-2-0 7-12-0212 at 3.65v


13x266mhz 2-2-2-0 7-12-0212 at 3.65v


Seems 266mhz 2-2-2-0 at 3.65v is okay for a comfortable overclock on Kayl Black Frozen SS with FX-57

I'm pretty sure my FX-57 is limited by cooling right now to clock any higher >3.6Ghz probably needs colder load temps.

Difference between idle and load at >1.65v vcore is as much as a +28C delta.

After FX-57, will try Opteron 170 CCBWE 0546XPMW and FX-60 CAB2E 0536RPMW

Thank you Kayl

[before]

Very nice effort buddy; nice pics and runs. Kayl has done a great work with this SS

[ugp]

Playing with a FX57 now I see...

Got tired of the FX60? I'll take it if you don't want it anymore lol

Anyway nice results man.

[Zeus]

Congrats on sub 21 minutes, i ain't gonna get ya there.

[bazx]

hehe thats the trouble with sub 0 its never enough

to know your chip will go faster if you could go that lil bit colder

ps you took ya time going phase

baz

[eva2000]

thanks guys

yes it's been a long time waiting for Kayl's Black beauty to be built hehe

ugp, fx-60 on sub zero will come later

I wonder how far i can push my HIS X1800XT did 44,443 3dmark2001 with FX-60 @3109Mhz on water

[SIOUX]

Exelent work eva2000

[Dynasty]

nice fx57 *0516* & SS ...eva 2000

[gloatlizard]

nice unit and nice work

[kayl]

nice bench there eva2000. Some really nice Spi times there.
They are some nice die temps ya getting there george for a fx and a small single stage cooler

[CapFTP]

nice bench there eva2000. Some really nice Spi times there.
They are some nice die temps ya getting there george for a fx and a small single stage cooler

oho....really good spi times....I had some test on 154 and same frequency and settings, but you gave me so much seconds....(i was slightly above 21 min)

I expected lower temp for the core...Kayl is correct accordin to you ? I expect something about -25 idle

[eva2000]

Thank guys

well Kayl says this Black Frozen SS is 1/4HP 8cc compressor with 404a - not sure what that means compared to other compressors and phase change setups but it's meant to be small ?

[CapFTP]

yes....possible....my setup is 1/2 HP and 402 (but have to check with Dimas...don't want to say silly things..)

[s7e9h3n]

Thank guys

well Kayl says this Black Frozen SS is 1/4" 8cc compressor with 404a - not sure what that means compared to other compressors and phase change setups but it's meant to be small ?

It's 1/4hp 8cc is the displacement of the compressor making it slightly smaller than the compressors used in the U.S. version of the mach2 (9cc). Those are great temps with such a small compressor and "just" r404. Nice job guys!

[eva2000]

i feel silly must of been using water cooling too long LOL

Here's some load tests with less vcore applied (thus colder temps heh)

FX-57 @13x233HTT = 3029Mhz at 1.504v vcore

Room temp = 23.7C
Compressor with probe on top = 40.8C
Evap idle = -42.6C
MBM5 idle = -24C to -22C



Cpu Burn K7 load test = MBM5 / Evap
load after 1 min = -4C / -38.4C
load after 3 min = -3C / -37.6C
load after 5 min = -3C / -37.3C
load after 12 min = -3C / -36.8C (compressor temps now at 42.5C)
load after 17 min = -3C to -2C/ -36.6C (compressor temps now at 43.6C)
load after 28 min = -3C to -2C/ -36.5C (compressor temps now at 46.5C)

[CapFTP]

good....perhaps you can lower that 1.504 for 3 gigs only....

[eva2000]

oh i deliberately set at 1.504 to give it some extra load hehe

[CapFTP]

ehe.....I saw your reply but I thought was a reply to a PM



no problem....i can understand

[eva2000]

replied to ya pm heh

Tried same load test but at 14x250HTT = 3500Mhz at 1.62v

Room temp = 24.4C
Evap idle = -40.0C
Compressor = 50C
MBM5 idle = -19C to -18C



Cpu Burn K7 load test = MBM5 / Evap
load after 1min +5C / -36.0C after that BSOD hehe guess enough to be 32M stable but not Cpu Burn K7 load stable

[CapFTP]

ehe....not below 0 anymore.....

ya ....read the PM...I'll try for sure...thnx !

[eva2000]

Tried upping vcore from 1.62v to 1.65v

Room temp = 24.5C
Evap idle = -40.0C
Compressor = 51.1C
MBM5 idle = -19C to -18C



Cpu Burn K7 load test = MBM5 / Evap
load after 1min +6C / -37.1C
load after 2min +7C / -34.4C
load after 3min +7C / -33.4C
load after 4min +7C / -33.2C
load after 5min +7C / -33.0C - BSOD at 5mins 3s just before i took a screenie.

[eva2000]

First Pcmark04 run with single 256MB BFG 7800GTX @473(525)/1350 with FX-57 @14x250HTT = 3500Mhz with MBM5 runnning in background logging temps and voltages

Pcmark04 = 6,849
http://service.futuremark.com/compare?pcm04=3236859

click on below image for full screenshot

[TaPaKaH]

Is that all ... ???
an FX-57 we`ve han a while ago was CABCE 0516WPMW ... clocked to 3.92GHZ on DI though

[Cooper]

Is that all ... ???
an FX-57 we`ve han a while ago was CABCE 0516WPMW ... clocked to 3.92GHZ on DI though

And could pass PCMark ?
I don`t think so

[TaPaKaH]

to Cooper
Well ... it passes 1M @ that freq ...