best super pi times?

[S!1v3rB@cK_Dk]

My 24/7 system written below in my sig, is doing it in 44sec.

[CCC]

here is my 29s

[hatemi]

38 sec at 303Fsb and 5/4. At 305 it would crash

[Try-this]

Originally posted by SAE
Thx

Good luck with ya Mach1 :thumbsup:

Thank you too

Hopefully I'll get my mach 1 next week - and the, when I get my "modding-tools", I'll mod the mobo

[Nikita]

XP2500+
NF7-S v2.0

[shimmishim]

mine seems really low

37 seconds on a 3.0C oc-ed to 4.0

[bias_hjorth]

hmm sounds much too slow.. what mem speed is that at 4ghz?

[Ridex]

Here is my score...

[Electroid]

1M: 35s

2500+@2811MHz (11*255)
Asus A7N8X DLX
2*256MB KHXPC3000, 5-2-2-2

[Tom Holck]

Originally posted by macci
I think that useing Win2003 Server or 64bit winxp like the #1 spot in the 32m rankings would improve that result a lot.

With optimal OS it would easily be the #1 result

Have had some trouble with the 64OS, still some 32 bit emulation and bad drivers, but::

Superpi 24.46

I noticed something interesting, when I go 64 bit, the FX gets more hot, and the men timings can't be so tight. It might be bad drivers og it might be some new activity in the CPU, when it's going 64bit

[Try-this]

WOW Tom

Very nice time indeed

Can't stop 'ing

[Try-this]

Originally posted by MickeyMouse
tom is that a WR 32m run??

Congrat's awomse work so what ya loose 50mhz core and a few mhz on the fsb??

I think the WR were 25:55, but Tom has smashed it completly

[macci]

Very nice improvement Tom

but the WR is 24m 36s (FX at 3G, 240 1:1 2-2-2-5). So there is 10secs to go.

[cpulloverclock]

Originally posted by Try-this
I think the WR were 25:55, but Tom has smashed it completly

sorry tom but the new WR is now at 24'36 with a FX-51@only 3009MHz

[cpulloverclock]

Originally posted by macci
Very nice improvement Tom

but the WR is 24m 36s (FX at 3G, 240 1:1 2-2-2-5). So there is 10secs to go.

brrrrr
I'm grilled

[macci]

cpulloverclock, damn I'm fast

btw think what OPPs FX at 12x256 1:1 2-2-2-6 would get on that bench!

[cpulloverclock]

Originally posted by macci
cpulloverclock, damn I'm fast

btw think what OPPs FX at 12x256 1:1 2-2-2-6 would get on that bench!

possible but toms FX can bench at 3190MHz
same score between 245*13 or 256*12?

[macci]

same score between 245*13 or 256*12?

Its 245 1:1 2-3-2-5 vs 256 1:1 2-2-2-5 If I remember correctly. So 256x12 might be faster overall.

[macci]

Jason, yea thats crazy
Notice that his Trc is at 7! :0

[macci]

btw, the man behind that 32m WR is also a member of these forums - kyosen from Japan.

[Tom Holck]

Originally posted by macci
Jason, yea thats crazy
Notice that his Trc is at 7! :0

I also have Trc7 Macci,
You remenber right my timings is 2-3-5-2
Tried everithing 2-2-2-11 almost work but crach on desktop?
Do you think more Mem-volt vill work, I am on 3.25, my PSU can get me more, but will it get me 2-5-2-2 ?? Bad Corsair RE erly realise?

[macci]

I'd try up to like 3.5V for Vddr.
I guess its possible that Corsair have used BH5 and CH5 on that RAM series? Maybe yours has CH5 (and OPP and Quad for instance has the BH5)?
CH5 quite often runs with RAS to CAS at 3 only.

[Tom Holck]

Originally posted by macci
I'd try up to like 3.5V for Vddr.
I guess its possible that Corsair have used BH5 and CH5 on that RAM series? Maybe yours has CH5 (and OPP and Quad for instance has the BH5)?
CH5 quite often runs with RAS to CAS at 3 only.

Just tried 3.53Volt cas 2-2-11-2 went blue schreen just before desktop

Removed the headspreader, you are right, it's CH5...
By some other Corsair next week, then I also can try x4 ?!

The M32 @ 3094 was safe bench. The PC have been turn on for very long time M/B temp close to 40 C now. Some other time at fresh boot. I can go +40/+50 Hz and take the 10 sek

Thanks Macci, the mem mysteri is solved.

[Tom Holck]

Originally posted by macci
Very nice improvement Tom

but the WR is 24m 36s (FX at 3G, 240 1:1 2-2-2-5). So there is 10secs to go.

well.
Tried a few times I admit,

24.21



FX-51 at 3120 2.080volt
mem 240 cas 2-3-5-2-7-14 3.25 volt

I have new Corsair comming in a few dayes hope for 2-5-2-2

[bigZ]

that's insane tom!

Takes me nearly 46 minutes with my Barton 2500+ @ 2555Mhz