DQ6 REV 3.3 QX6700 @ 481FSB & 7800GTX @ SLI(out of the box & pics inside)

**PcCI2iminal** · 03-04-2007, 11:25 PM

Gigabyte DQ6 Rev 3.3

Benchs(the vdrop is bad-> Bios 1.5375->idle 1.456v->load 1.408v<->1.424v

http://valid.x86-secret.com/show_oc?id=174464

Bios

MB->DQ6
CPU->QX6700
CPU Cooler->Scythe Infinity
FAN->SanAce 120x120x38 @ 104CFM x 2
RAM->Crucial 6400
VGA->Elsa + Gigabyte 7800GTX SLI 500/1400mhz
HDD->Hitachi 40GB
PSU->Giga-EZ 1000w
Room temp->23C

**over@locker886** · 03-04-2007, 11:45 PM

Thank you review

Please test with Core 2 Duo, and find max FSB!

**PcCI2iminal** · 03-04-2007, 11:59 PM

Originally Posted by over@locker886

Thank you review

Please test with Core 2 Duo, and find max FSB!

Core 2 Duo will be the next but my chip isn`t good on air,i think 520->530FSB will be the maximum

**GuruxXx** · 03-05-2007, 01:15 AM

Nice FSB, please try with one mem. module and tham do max FSB.
IO have to test 3 diferente GA Mb, and all 3 need more vcore than P5B DLX, is the same think with this MB.

**DeDaL** · 03-05-2007, 01:53 AM

PcCI2iminal nice preview as always !

**PcCI2iminal** · 03-05-2007, 04:02 AM

http://valid.x86-secret.com/show_oc?id=174524

vmch,vfsb-->maximum

**PcCI2iminal** · 03-05-2007, 04:04 AM

Originally Posted by GuruxXx

Nice FSB, please try with one mem. module and tham do max FSB.

single or dual seems to be the same

IO have to test 3 diferente GA Mb, and all 3 need more vcore than P5B DLX, is the same think with this MB

she needs a bit more than P5B DLX/Premium or Commando

**XenatR** · 03-05-2007, 04:48 AM

i still think im gona stick with my QX6700 + BadAxe2 combo (hopefully buying in 2weeks)

**BlueAqua** · 03-05-2007, 06:19 AM

Nice results as always PcCI2iminal. Did you have to do anything special to get SLI to work?

**PcCI2iminal** · 03-05-2007, 06:57 AM

Originally Posted by BlueAqua

Nice results as always PcCI2iminal. Did you have to do anything special to get SLI to work?

nope but the 85.96 hacked driver isn`t working for me ,i can get SLI enable with them but after rebooting i got a black screen

the 84.56 works very fine

**PcCI2iminal** · 03-05-2007, 03:00 PM

new update

3d06
QX6700 3700mhz
7800GTX SLI 530/1400mhz
9699 3dmarks
http://service.futuremark.com/compare?3dm06=1379838

489FSB
http://valid.x86-secret.com/show_oc?id=174656

**AndreYang** · 03-05-2007, 03:05 PM

How about max FSB for QX6700 Prime 95*4(CPU loading 100%)?

**PcCI2iminal** · 03-05-2007, 03:11 PM

Originally Posted by AndreYang

How about max FSB for QX6700 Prime 95*4(CPU loading 100%)?

i think 450 x 8 ,i will check for you

**PcCI2iminal** · 03-06-2007, 05:36 AM

Originally Posted by AndreYang

How about max FSB for QX6700 Prime 95*4(CPU loading 100%)?

here Andre

470FSB

DQ-6 is better than Asus P5B or Commando

**PcCI2iminal** · 03-07-2007, 07:32 AM

Q6700 at 4GHz+ on air benchable

Pi1mb->4100mhz

3d01->4000mhz

http://service.futuremark.com/compare?2k1=9161838

3d03 ->3950mhz

http://service.futuremark.com/compare?2k3=5247033

3d05->3920mhz
http://service.futuremark.com/compare?3dm05=2766437

3d06->3800mhz

http://service.futuremark.com/compare?3dm06=1391599

room temp->16C
cpu cooler->Scythe Infinity
fan->SanAce 120x120x38 104CFM x 2

**catscit** · 03-07-2007, 07:46 AM

is default mp 10 so much slower?
You run mp 9 for high mhz and 7 for max fsb. i can understand 7 for max fsb testing, but why 9 for max mhz?
what is the max benchable fsb at mp 10?

**PcCI2iminal** · 03-07-2007, 07:59 AM

the max clock for 3d benchs on air is 4ghz -> 10 x 400 or 9 x 444 (8x500->impossible)
i used 9 x 444 cz it gave me a better bandwidth

10 x 400

**catscit** · 03-07-2007, 08:02 AM

thanx for this info.
qx6700 seems to have same problem as e6700, high mp just doesn't want to help in high mhz. e6600 is much better in this respect.
Some x6800 really like high mp, but some don't.
Your qx6700 must be pretty good.

Still interesting that you get 400x10 bench (3d even) stable, nice work!
QX6700 over 4ghz is very nice.
This is still all under air cooling?
respect.

**HamidFULL** · 03-07-2007, 09:56 AM

very very nice!! really better SLI driver for 965P is required

**dr-ali** · 04-04-2007, 12:33 PM

fantastic

my Question is: can 965P-DQ6 (REV 1.0) overclocking stable QX6700 & Q6600 same as 965P-DQ6 (REV 3.3)?

**dr-ali** · 04-05-2007, 03:34 AM

??????

**SSXeon** · 04-05-2007, 03:43 AM

Wow nice!!!! 4GHz!!

Your using a Thermalright HR01? What fan, and what are your temps. Is it prime stable? Im very jealous.

**PcCI2iminal** · 04-05-2007, 07:26 AM

Originally Posted by dr-ali

fantastic

my Question is: can 965P-DQ6 (REV 1.0) overclocking stable QX6700 & Q6600 same as 965P-DQ6 (REV 3.3)?

i don`t think that rev 1.0 can handle a hughe FSB like rev 3.3

Your using a Thermalright HR01? What fan, and what are your temps. Is it prime stable? Im very jealous

nah ,the sink was a Scythe Infinity with two SanAces 104CFM

prime stable @ 3700mhz on air(room temp 16C)

**SSXeon** · 04-05-2007, 02:02 PM

Originally Posted by PcCI2iminal

i don`t think that rev 1.0 can handle a hughe FSB like rev 3.3

nah ,the sink was a Scythe Infinity with two SanAces 104CFM

prime stable @ 3700mhz on air(room temp 16C)

Wow you have a amazing chip! What are your load temps? Thanx and awsome oc! 1GHz club

**noobzed** · 04-05-2007, 02:16 PM

again another review with handpicked hardware by the engeeners ...

Thread: DQ6 REV 3.3 QX6700 @ 481FSB & 7800GTX @ SLI(out of the box & pics inside)

Thread Tools

Search Thread

Rate This Thread

Display

DQ6 REV 3.3 QX6700 @ 481FSB & 7800GTX @ SLI(out of the box & pics inside)

Bookmarks

Bookmarks

Posting Permissions