Opteron 146 CABYE 0540 FPMW @ 3.5GHz

Ram divider @ 7/10
Able to do basic stuffs but not Prime :D

http://i2.photobucket.com/albums/y14...r0/AMDOPT3.jpg
http://i2.photobucket.com/albums/y14...0/Browsing.jpg

nice :)
what cooling and what's the ram running at? and is it stable at say 50mhz less?

very nice job! what is your cooling?

Quote:

---

Originally Posted by biohead

nice :)
what cooling and what's the ram running at? and is it stable at say 50mhz less?

---

On a single phase (Vapo LS)
As for ram. its running @ 7/10 (DDR280) divider
Guess there's bug with CPUz

X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D
OCZ Powerstream 520W
Cooler Master Hyper 6 / Vapochill LS <---- :p:

Quote:

---

Originally Posted by njkid32

very nice job! what is your cooling?

---

On a single phase (Vapo LS)

Quote:

---

Originally Posted by eR1k

X2 4400+ / Opteron 146
Corsair UCCC 2 x 1GB / Twinmos BH5 2 x 512MB
DFI NF4 Ultra D
OCZ Powerstream 520W
Cooler Master Hyper 6 / Vapochill LS <---- :p:

---

Thanks bro :D

Nice. Looks like i might have to jump a CABYE soon. It is very hard to find CABNE, and i am afraid the overall quality of opterons might drop a bit soon.
And 3.2 ghz 24/7 would not be too bad :D

Here's what it can do on AIR :)
Ambient @ 29c

http://i2.photobucket.com/albums/y14/5ubz3r0/2AIR.jpg
http://i2.photobucket.com/albums/y14/5ubz3r0/3AIR.jpg

Holy :banana::banana::banana::banana: dude! These 0540s looking better and better... what's your highest 24/7 settings!?

Quote:

---

Originally Posted by Oden

Holy :banana::banana::banana::banana: dude! These 0540s looking better and better... what's your highest 24/7 settings!?

---

24 x 7 i'm on air with Cooler Master Hyper 6
Clocked @ 3GHz (1.425 x 104%) Prime Stable

you´ve the same problem with cpu-z than me ^^. my bh5 is running to @ 380 mhz ^^

Quote:

---

Originally Posted by Xtasy

you´ve the same problem with cpu-z than me ^^. my bh5 is running to @ 380 mhz ^^

---

On 7/10 divider?
Mine happen only when i run 7/10

Ok, but what I really meant were, how high can you go with your single-stage, prime95-stable?

That's really nice man, I thought there won't come a good S939 Opteron after de CABNE 0530 APMW, but i was wrong :D
What are you're temps and is your IHS still on or not? Maybe try DI some time :rolleyes:

Quote:

---

Originally Posted by dfx

On 7/10 divider?
Mine happen only when i run 7/10

---

You got pretty good result here, some opty can take you under 23 sec I bet.

where can i buy THAT cpu!!! :)

What's your temps with the LS btw? Seen some results of +10 degrees C, with a single-stage...

Quote:

---

Originally Posted by Oden

What's your temps with the LS btw? Seen some results of +10 degrees C, with a single-stage...

---

Evap @ -53c
Full load temp for cpu @ -9c

Quote:

---

Originally Posted by mag|c

where can i buy THAT cpu!!! :)

---

Got it from my local hardware store (Singapore) :D

Quote:

---

Originally Posted by EclectiK

You got pretty good result here, some opty can take you under 23 sec I bet.

---

Yep.. I agreed
I'm going to try break into 22s coming weekend since mine can boot into 3.6GHz but arent able to capture screenie
So i buffer i still got room for about 50MHz ~ 80MHz to play with
Hope this allow me to breal into 22s :D

Quote:

---

Originally Posted by Oden

Ok, but what I really meant were, how high can you go with your single-stage, prime95-stable?

---

Havent tried priming this chip on Ph/C

My error guys :(
Mine is a CABYE 0540 FPMW
Not FPBW :D

http://i2.photobucket.com/albums/y14...0/DSC01773.jpg
http://i2.photobucket.com/albums/y14...0/DSC01774.jpg
http://i2.photobucket.com/albums/y14...0/DSC01779.jpg

ah ha so it ain't a FPBW!

Quote:

---

Originally Posted by eva2000

ah ha so it ain't a FPBW!

---

Yep very sorry bro :(
Just realise when i take a 2nd look :)