Printable View
Wow, just rcv'd yesterday. Running 3.2Ghz @ 1.18Vcore :)
WCG stable all night along with 10 instances of Dimes :)
I will push it more this weekend, wow...
Asus P5WDH > BIOS 1305 till this weekend
E6600 with Scythe Infinity >Coretemp registers 35C :)
OCZ Gamestream 600W
Corsair PC-6400 (C4)
GPU = POS till my ATI 1950 arrives
:YIPPIE: :YIPPIE: :YIPPIE: :YIPPIE: :YIPPIE: :YIPPIE: :YIPPIE: :YIPPIE: :YIPPIE:
hello,
what's the complete step ? L629B... ?
I have a L629B also. It's not a special chip, overclocks just about as much as any other. Does 3.2GHz at default volt. I don't understand the hysteria about certain weeks...
its the "B" that makes it a good chip :toast:
http://www.xtremesystems.org/forums/...d.php?t=117454
http://www.xtremesystems.org/forums/...d.php?t=121041
Quote:
Originally Posted by DAK1640
Congrats man! :woot: :toast: do you know where it shipped out of?
Just to confirm I have a L629B003 and I wouldn't says its that good, above average thats all. My L629A531 is far better and will do 3.6 at default volts and run over 4G's.
my 628B oc very well too.. 3,2 at 1,18 just like yours
Whats the load voltage? 1.18 is the idle voltage?
my 629b e6300 runs at 3.3 at 1.385v. prob lower but i haven't tried.
Where are you getting the voltage to the 1000th of a volt?
The motherboard sets to 1.35, etc.
Where do you get the 1.385?
Andrew
It's all about Luck of the Draw :p: ....Quote:
Originally Posted by The Asgard
how can i tell all that crap without looking on the IHS?
im curious what my e6300 is.
it goes to the 1000th on my ga-965p-s3Quote:
Originally Posted by aamsel
Damn, 1.18vcore???? That's amazing! My E6600 isn't stable as soon as it drops below 1.3vcore at 3ghz.
I also noticed your VID shows up in Coretemp as 1.2375v - why's that? Mine shows up as 1.325v, it's a B2 revision as well.
Just went to have a look, my E6600 is an L627A100...
*looks at my 1.3v, 40c idle 48c load POS*
/jealous
My E6300 can do 3.4ghz @ 1.4V and it's a week 25A.
Be very happy. I know people who have E6600's who can't get past 3.5ghz @1.55V
I can't give you those answers, perhaps the rev of the mobo? I hit 3.6Ghz at 1.350V today...:woot: :woot: :woot: Still playing around. Just finished flashing to 1503...Will check some more shortly. I can't continue to impact my WCG output too much...:banana:Quote:
Originally Posted by scoobysix
Nice results. :)
I thought someone asked this... may I ask what location you received the chip from.
Thread Title...lol:p:
Shipped from newegg CA warehouse or NJ warehouse? Thanks.
IDK...I found out///
UPS Tracking Number:
xxxxxxxxxxxx (Shipped from Edison, NJ)
Tracking Number Issued: 10/30/2006 7:21:02 PM
-------------------------------------------------------------------------------------------------------------------
Item Description Quantity
13-131-025 MB ASUS P5W DH DELUXE/WIFI-AP GREEN 1
20-145-034 MEM 1Gx2|COR 240P TWIN2X2048-6400C4 1
19-115-003 CPU INTEL|C2D E6600 2.4G 775 4M R 1
17-341-001 PSU OCZ|OCZ600GXSSLI 600W RT 1
21-103-201 FD 1.44MB|ALPS #DF354H121F BLACK % 1
27-151-136 DVD_BURN SAMSUNG|SH-S182M/BEBN BK % 1
35-185-027 CPU COOLER SCYTHE USA|SCINF-1000 RT 1
Thank you for the info. :D
yes thx for the info! :woot:
Well, I have one on the way from CA warehouse, will be here Tuesday. Hope it clocks better than the one I have now
I just received a E6600 from NewEgg and it was L629Bxxxx
So far its been 3DMark2001 and superPI 32M stable at 460x8 and 1.18v (3680MHz). It was also 3DMark stable at 500x6, didnt try superPI.
It was also superPI stable at 430*9 (3870MHz) but crashed halfway through 3DMark. I'm going to try higher voltages tomorrow to see if I can stabilize it at 4GHz but Im pretty happy so far - I wasnt expecting to OC more than 3.2GHz. :D I'll probably drop it to 460x8 for 24/7 usage though if its stable enough.
PS - Board is P5B Deluxe, Memory G.Skill HZ 2x1GB and Scythe Infinity for cooling.
PPS - Shipped from CA even though Im in NY.
i just put my week 24 chip up on ebay after seeing this thread. i must have a B!!!