Printable View
NEW VERSION! 1.50 now. Download here - 200 KB
1) Processor test - leave ONLY CPU (FPU) checkbox checked.
2) Settings - make processor check "long" by dragging the slider left.
3) Start Testing! [60 min test]
On my system, this prog heats up the CPU 5 degrees above prime running small FFTs. Just thought many of ya could use this for stability testing. Post if you've never seen a temp this high on your system :toast:
i've seen 64° oO, with prime, i got 61°!
Better (=hotter) than cpuburn?
Need for Speed Underground 2 got my CPU running hotter than prime ever did. :-/
Torin
Did you try this? ;)
macci
I think so. Give it a try - can't hurt IMO :)
Danm no 'haaa hooo hootttt' smiley hehe, so :flame: and hopefully not :explode:
Tried S&M.....an appropriate name for what happens to the poor cpu :lol:
S754 3400+ Claw aircooled @2.6Ghz, 1.81vcpu, idle @ 37C, max in the 15 minutes of S&M was 47C, so 10C max rise in temp. average probably 9C.
Got to do a little off this :toast: while running ;)
mad mikee
How many degrees did the temp rise from previous top temp?
stevehat1
Only 10 degrees up from IDLE? Did you do FPU only?? Cause my buddy with a 2500+ Mobile got his chip running 10 degrees ABOVE Prime95 small FFTs :)
FPU only. This test seems to raise CPU temps quite well, I don't think my cpu will pass 15 min prime at the same clocks, but I don't use prime for checking stability. When this thing isn't benching it running F@H. I find what F@H runs at then back down a little and run it there 24/7Quote:
Originally Posted by IvanAndreevich
Wow it heated my stuff up pretty good.
EDIT: It finds memory errors quicker then memtest too lol I dont think I like this proggy!;)
twiggy
Yes, this is the kind of result I get - 5 degrees higher than prime. Memory test IS pickier than Prime @ large FFTs too :slobber:
it sure does burn my vapo'd cpu up fast.
is there an option where i can loop it?
Read title hehe.
Sures helps set paste faster, ran it a few times and lower every time. Stuck @ about 52-53 max. Priming 1024-4096 to get the memory chugging, even w/ blend only up to 48c now :D
Memory test sends me back to the minors w/in 3 minutes, so back to priming :mad:
Shane5578
I believe the loop isn't included in the current release. I am willing to be it will be in something that is more final :)
mad mikee
Nice rise from Prime small FFTs :)
bump
Just gave this a go, sure gets mine a lot hotter than anything else i've tried yet!
STEvil
4-5 C?
not bad, a gd 5-8° increased over prime.
So on the settings screen, from left to right,
Processor check: long, everything else unchecked
Tests: CPU (FPU) is only one checked
Memory checking: long, everything else unchecked
Should I even change anything with the memory checking? I want to start using this app as my stability tester, and I just wanna know how exactly a few of these things should be set to ensure I'm getting fairly dependable results out of this program.
yeah, 4-5c above prime.
Ahh :banana: :banana: :banana: :banana: this!!!
My Athlon @2.6GHz @1.84v Primes for months non stop @~46C max, with this program it stops with the "failed" error within 3 mins.
I also notice my 12v rails jumps above 13v while running this, must replace my POS 550w Q-Tec ASAP! :eek:
Comparison against CPUburn k7 and others:
http://testmem.nm.ru/snm.htm
Latest version will also be at that page (currently same as the original linked at the top of this thread).
Hehe, too bad I can't read it.....and my translator doesn't like it either. :(Quote:
Originally Posted by halcyon
Seems my problem is purely heat related, anything at/above 50C and the test would cap out immediately (by decreasing the tornado fan speed), it passed the 1 hour FPU test @2.5GHz with 1.76v as the temp only tops out at 44C.
Gonna have to add a custom liquid cooling setup to the list... :(
stealthbomber
Yes, my friend had the same problem on a aircooled XP-M 2500+. It's stable in Prime, but this prog just made it 8C hotter so his computer would crash.
Burnk7 (for socket A/462) is still the best imho, it's way hotter than prime95 and probably this too. I'll do a comparison sometime.