[B]What is Vio 3.7V
Printable View
[B]What is Vio 3.7V
:confused: 3.3v lineQuote:
Originally Posted by Nosfer@tu
bloody hell. :/ that's insane..
can someone explain how it's similar to a p3 when it's 90nm ?
Damn ! :slobber:
you make me want one BAD!!!! :mad:
Pentium M (dothan) recipe:Quote:
Originally Posted by DeltZ
you get a P6 core (pentium pro, pentium 2, pentium 3), you add P4's quad pumped fsb, you spice it a little with some data prefetch improvements and SSE2. finally throw 2mb L2 cache. cook it at 90nm strained silicon till its crispy.
there you go, you got a nice ass kicking cool running dothan ;)
^^ nice analogy :D
Try 32M watch a stock 4000+ beat it. Dothan has some colossal performance flaws. Which it why it's not on the desktop, yet, in current form.
Can't wait to see what Fugger will be able to do with this chip :D
by TAM
1:1_200起動_245.8x13=3195__22.843s
1:1_200起動_229.0x14=3207__23.078s
5:4_201起動_320.5x10=3206__22.825s
3:2 201起動_320.5x10=3206__23.719s
3:2 = limit at 341 fsb P4C800-e deluxe
5:4 = limit at 322 fsb P4C800-e deluxe
画像保存できませんでしたが、3450(fsb265.4x13)で、21.031
0.2秒差の洋paiで、J20出す為には、3480位まで廻す必要がありますので、
手持ちの石では、かなりムズイです。(--;;
これ以上、石逝く訳にはいきませんので、システム的に見直そうと思います。
http://u-san.net/c-board/file/M760-ddr266-fsb341.gif
21s by New Beetle
M/B：ASUS P4P800-SE 改 + CT-479 / 52MG055377 / BIOS：1009se.001
M/B Bed：「V-TEC ARC Bed Rev.3.3」
CPU：Pentium M 740 / Q502A541
CPU Cooling：「クリぬいてマス！Pro２」＋LN2
Chipset Cooling：Normal Heatsink
Memory：TwinMOS PC2700 BH-6 256MB x2 /DDR320/ CL2.0-2-2-5-4-A-A-A
VGA：ATI XPERT 98 PCI 8MB
HDD：IBM-DTLA-307030 /U-DMA 5 (ATA100)
PowerSuplly：Zippy-460WS #2 （3.3V改）
Vcore：1.61V（実測）/ Vddr：3.46V（実測）/ Vio：3.73V（実測）
OS：Windows Server 2003
備考：DDR320起動 / MAXMEM=105 / LN2冷却 / グラファイトシート使用
"http://ntake.hp.infoseek.co.jp/cgi-bin/bbs/c-board.cgi?cmd=ntr;tree=750;id=" = copy and paste this to the address bar
http://homepage2.nifty.com/NewBeetle/img025.gif
http://homepage2.nifty.com/NewBeetle...15.html#SPI_1M
see above for the link and more detailsQuote:
Originally Posted by Enz0
nice but at 3.5-3.62GHz-3.66GHz I would have seen 20.8, 19.9 and 19.6s :mad:
P4P800SE with an original eeprom + asynch mode = pat disabled :(
270 and more*13 1:1 with pat enabled = 20s
congrats to him for this awesome ocing :toast:
I assume thats under LN2 right?
pluton coolingQuote:
Originally Posted by Sentential
-230°C
WTF :eek: :eek: :eek:Quote:
Originally Posted by cpulloverclock
Amazing scores guys :slobber: :clap: :banana: Waiting for more spi stuff :p:
Quote:
Originally Posted by cpulloverclock
pics? i have never seen this cooling system...
I think he's being sarcastic, pluton cooling exists, but I dunno anything about it. But if they used it, then surely we'd have a whole thread on that, and who cares about a new sp1m record with a dothan if someone got to -230c right?
Unfortunately they can only be run on AGP boards. They wont be able to support the new PCI-E cards. I think of these chips more for benching, than for gaming use.
http://img180.echo.cx/img180/3121/m760348220s2cq.gif
WR is HERE!
:slobber:
TAM is too advanced..
http://www16.big.or.jp/~bunnywk/superpi.html
:eek:
holllllllly crap
WOW!
unpatched version?
I want a run with the milli version
okay new official WR ;)
Time: 20s (Original Superπ 1M)
Clock：3482.3MHz (fsb267.9Mhz x13)
CPU: PentiumM 760 JSL7SM MALAYSIA
M/B: ASUS P4C800-E (36ZG / BIOS:1021.007) + CT-479
CPU Cooling: LN2 (Pro3 + V-TEC ARC Bed Rev.3.4)
Memory: Kingston KHX3500 CL2 256MB x2
VGA: ATI rageXL (PCI)
HDD: IBM DTLA-307015
Power Supply: Zippy-460w
Vcore: 1.650v (テスタ読み)
Vddr: 3.70v, Vio: 3.77v, Vagp: 1.85v
OS: Windows Server 2003
MEM: 400MHz, Turbo, CL2.0-2-2-5-4-E-A-A
備考: 1:1 200MHz起動、室温15℃
http://u-san.net/c-board/file/M760-3466_20s907.gif
who will be first to 19s?
at 3.66GHz with a P4C800-e dlx and 1:1 NewBeetle could hope
good job!
New Beetle said, "When I set to 1:1, I couldn't reach 3GHz. But, when I set to 5:4, I could reach 3.66GHz. It was unbelievable."(translated by me)Quote:
Originally Posted by cpulloverclock
Though, I hope he gets 19s.
yes, normal there is a bug with the P4P800SEQuote:
Originally Posted by Enz0
same thing with another friend
no problem with the P4C800-e dx
I dunno if the vid4 mod helps