Printable View
Well it failed prime small fft after 1 hour, i am going to continue burning and see if I can get prime stable at 2900 with 1.408vQuote:
Originally Posted by musk
***Update*** =- burning in at 2950 with 1.5v - totally solid at 2900 for over 12 hours at 1.4v . went 110% to get 1.5v,could of gone lower I suppose, and get into windows at 2950
musk
May as well post an update on my cpu:
3200+ LBBLE 0515APAW on a stock heatsink (with a 80-70mm fan adapter):
http://img76.echo.cx/img76/3342/10x2901ey.jpg
3dmark, stock cooling, unoptimized, 6600gt @ 562/1126:
http://img55.echo.cx/img55/669/3dmark25k6yk.jpg
Trying to get some stability here still:
http://img76.echo.cx/img76/1336/10x3003jr.jpg
What mobo R U using?
Quote:
Originally Posted by s7e9h3n
SLI-D ;)Quote:
Originally Posted by Deus Falsus
I wish I had results like yours...my chip sucks. :(Quote:
Originally Posted by s7e9h3n
3200+ LBBLE 0516APAW - 2800MHZ 1.408V AIR - D3kMatrix XS/OCforums
Prime/SuperPI/Gaming/3DMark Stable
This is not the ceiling of this chip either, will post another update after some more Priming/Burning.
http://shared.sploitz.com/system/A64-v3200-0515.JPG
http://shared.sploitz.com/system/ven...80x10_1.4v.jpg
Thats is the only screen shot I have for 1.4v @ 2800, but if u need one with more Prime time heres one at 1.55v @ 2800 for 19 hours
3000+ Venice LBBLE 0517BPMW
Abit AV8
2x Micron Rev5B "C"
CM Hyper6
http://valid.x86-secret.com/show_oc?id=18910
Screenie was a tad screwy, needed 1.625v for that.
sin22 how far did you reach on aircooling on standard voltage ?
@D3kmatrix : very nice cpu you got there.
:D, never did test standard voltage a lot to be honest. I think the last i tried was 260x9 and it was on default volts and could boot fine. After that I jumped straight to 312x9 @ 1.6v and it booted fine and from there fine-tuned it.
-Offtopic-Quote:
Originally Posted by Troman
Ive noticed tht the CPU's tht share this stepping (same as mine) all max out at almost the same speed i.e between 2900-2930mhz. Im wondering r u using a HTT speed of 325mhz? Please PM your answer, thanxs
so CBBLE is good stepping and 0515 good date , right ?
I dunno if there's any cbble 0515's though. Seems as if the cbble's were produced earlier than week 15.Quote:
Originally Posted by TEDY
Here's what I did last night - still on aiir. I'm tempted to fire up the mach2 even with the dent in it's condenser :p:
http://img281.echo.cx/img281/4245/10x290spi32m0fb.jpg
Hi s7e9h3n :)Quote:
Originally Posted by s7e9h3n
What kind of air cooling? Still stock heatsink with fan adapter?? :slobber:
Hehehehe ;) For this one I used a Hyper6 I just bought. I must say that it's a very, very good heatsink. Keeps load temps about 10 degrees C cooler than the stock cooler. I think I'll take a shot at 3g 32m stable on air before throwing her under an evap :DQuote:
Originally Posted by Toki
Sorry for not updateing list , but ive sold my Winnie and was couple days without my orginal box. Today my cpu arrived its LBBLE 0517 EPAW.
Seems its not top one , for now 2700 mhz 1.48v , but my cooling sucks ( 51o Pentagram Freezone QC-80 CU ). Tonight ill try to gather results from forum and update list. Greetz.
By me:
3000+ lbble 0516 cpcw 2610 1.65v stock heatsink stable
3200+ lbble 0517 bpew 3004 1.65v stock heatsink suicide shot
3200+ lbble 0517 bpew 2800 1.56v stock heatsink stable
:toast:
You can put this up for me.....
3000+ LBBLE 0516EPKW - 2700MHz 1.696v Air - Cornelious0_0 XS
ADA3000DAA4BP
LBLLE 0516GPAW
prime/3dmark stable at 2754MHz, not stable at 2808MHz and above.
Cooling: Air Xp120 heatsink
sticky this :=)
LBBLE 0516GPDW 3200 onyone? bad or good?
List updated.
Seems that whole 0516 week was bad. Only exempt is great stepping *PAW , but even it is bit worst ocer then other weeks.
Seems there is no bad ocers from 0517 and each one hit 2700 with quite normal voltage.
Only one 0518 , and result isnt bad 2853 mhz - 1.696v , lets hope all 0518 will be nice.
Greetz
Hey sobol, great work here. Just a couple of corrections for my cpu's on the list though:
3200+ LBBLE 0515APAW - 2906 MHZ 1.584V AIR - s7e9h3n XS
Should be 1.55 and spi 32m stable
3800+ CBBLE 0504EPMW - 3306 MHZ 1.664V ???? - s7e9h3n
Mach2 cooling
Your hard work is appreciated by all here. Thanks!
s7e9h3n , thanks, took me only 4h to collect it :D
Your results updated.
Yeah this is really nice to have
Thanks for doing this Sobol!
Great work.
:)
After having a look at the data, there are 5 entries for the 3200+ LBBLE 0515 APAW, all of them doing at least 2800mhz at 1.55v or under, on air cooling. I think this is the only one that really stands out at the moment as a consistent good oc chip. There are some other steppings that are doing quite well as well, but I'm hoping there will be more information on them later. :)