TESTING a 3.6GHz Prescott @ 5GHz........

Just testing my new toy.......... :D

Pentium4 Prescott 3.6GHz @ 5GHz.......

System

Motherboard : ABIT AS8 full moded (Vdroop - Vchip - Vfsb - VAgp - VCore - Capacitors - Heatsinks - e.t.c.)
PSU : ENERMAX 550 Watts
RAM : 2 x 256MB Kingston Value Rams PC2700(DDR333)
Cooling : hi-pro-mmie with R410 gas
EXTRAS : DDR Maximizer

First some "indicaded" photos about mounting the Prommie's evaporator onto CPU.......

http://www.thelab.gr/images/Hipro5/A...miemount/1.jpg

http://www.thelab.gr/images/Hipro5/A...miemount/2.jpg

http://www.thelab.gr/images/Hipro5/A...miemount/3.jpg

.........and a thermal sensor for the temps coz AS8 doesn't shows subzero temperatures.......

http://www.thelab.gr/images/Hipro5/A...unt/Sensor.jpg


Now some S-Sandra Arithmetic.......

http://www.thelab.gr/images/Hipro5/P...953MHz_png.png

S-Sandra Multimedia......

http://www.thelab.gr/images/Hipro5/P...953MHz_png.png

Super-Pi 1M UNPATCHED

http://www.thelab.gr/images/Hipro5/S...ec_5001MHz.png

Super-Pi 1M PATCHED

http://www.thelab.gr/images/Hipro5/P...001MHz_png.png

Super-Pi 32M UNPATCHED

http://www.thelab.gr/images/Hipro5/P...937MHz_png.png

Super-Pi 32M PATCHED

http://www.thelab.gr/images/Hipro5/P...937MHz_png.png

3DMark2003 with a X800XT at core=648 , mem=627

http://www.thelab.gr/images/Hipro5/P...48_627_png.png

3DMark2005 with a X800XT at core=654 , mem=634

http://www.thelab.gr/images/Hipro5/P..._634_1_png.png

http://www.thelab.gr/images/Hipro5/P..._634_2_png.png

.........and a max screenshot - not testing for more for the time been - ........

http://www.thelab.gr/images/Hipro5/P...235MHz_png.png

That's for now and still playing around...... :D

Very Nice work :toast:

Once again another Abit board that you made unique :D

very nice indeed... you got the dimension/measurements of that prommy mounting bracket ?? :)

mmmmm cap mods...

Awesome work hip, got enough seal'goop? xD

:bows: very nice overclock! Did adding extra capacitators help much? What temps you getting?

Quote:

---

Originally Posted by eva2000

very nice indeed... you got the dimension/measurements of that prommy mounting bracket ?? :)

---

There are 72mm x 72mm from hole to hole...........BUT you have to be carefull about the CENTER of the Prommie's evap coz it ISN'T in the middle of it's "head" so you have to dreel somehow "out-of-center" so as to make a good and centered contact to the CPU...... ;)

Quote:

---

Originally Posted by Bennah

Very Nice work :toast:

Once again another Abit board that you made unique :D

---

Thanks....... :D

Quote:

---

Originally Posted by Kobalt

:bows: very nice overclock! Did adding extra capacitators help much? What temps you getting?

---

With the Vdroop mod yes they helped at full load...... ;)

At idle I have onto CPU (external sensor) about - 50*C and at full load I have about -32 to -34*C.......

Quote:

---

Originally Posted by µnrealneo²

Ooh, here it comes... :D

Nice Hipro.

Ever considered A64?

I'm sure you could shake up the 01 ORB. ;)

---

Yeap.......As a matter of fact I do........With my new evaporator and my Cascade(still building it) I think I could do some damage........ :D

http://www.thelab.gr/images/Hipro5/Z...ator_1_jpg.jpg

Nice work Hipro! Got a shot of the maximizer in action?

Put some OCZ VX ram and see what it does with 3.6 :idea:

Quote:

---

Originally Posted by moddolicous

Put some OCZ VX ram and see what it does with 3.6 :idea:

---

Naaaa.........I don't think they can do more than those BH-6 chipies...... :D

http://www.thelab.gr/images/Hipro5/P...642MHz_png.png

are u going to make a guide soon, or did u make one already, cause I'd like to try these mods

Quote:

---

Originally Posted by moddolicous

are u going to make a guide soon, or did u make one already, cause I'd like to try these mods

---

Yes it will be uploaded soon....... ;)

VERY nice work :D


i look forward to a guide

hipro5
Why do you keep working with Abit boards? :)

Quote:

---

Originally Posted by IvanAndreevich

hipro5
Why do you keep working with Abit boards? :)

---

I was fond of ASUS mobos a few time ago.........ALL my mobos where ASUS......TILL ASUS CUSL2 - P3 .....After those mobos ASUS started to "steel" them by NOT soldering all the components on them.......Then I came to ABIT ones.......At least they are less "steeled" in components.......Now I'm fond of ABIT ones......and life goes on..... ;) :)

first of all, great work...

But, did you set the speeds with uguru or are you using another windows tool to change clockspeeds?

very nice work again :bows:

have you considered DFI?

Quote:

---

Originally Posted by Firefoxx

first of all, great work...

But, did you set the speeds with uguru or are you using another windows tool to change clockspeeds?

---

Those are the speeds I could boot into Windows.......Yes played with the uGuru.....I wish that there was a ckockgen for that.......

Quote:

---

Originally Posted by enzoR

very nice work again :bows:

have you considered DFI?

---

Thanks............Yes IF I could find a mobo here in Hellas why not?....... ;)

Quote:

---

Originally Posted by hipro5

Thanks............Yes IF I could find a mobo here in Hellas why not?....... ;)

---

What board do you need Hypro 5?
I can find DFI board here in Bulgaria and I can send it to you, or you can come to me ... i live in the southern part of Bulgaria and it is about 150-200km. from Athens.

Quote:

---

Originally Posted by V I P E R

i live in the southern part of Bulgaria and it is about 150-200km. from Athens.

---

add 500Km to those 150-200km and you might be right!!!Maybe thesaloniki is 150-200km!


Nice work Hipro5, maybe we can freeze my winnie some time soon :D

Hi.

That was superb. A very good job at an Intel CPU. That was fantastic.
The SuperPI score is an world record @ Intel??? :rolleyes:

Go On, an keep your CPU toasted! :D

Quote:

---

Originally Posted by GinTonic

The SuperPI score is an world record @ Intel??? :rolleyes:

---

No, i think memesema with a 5.5Ghz P4 is still holding the WR on Intel.